Table of Contents
Upgrading your Audi S4 with a H&R Suspension Kit can significantly enhance your vehicle’s handling and performance. This guide will take you through the process of installing this suspension kit, ensuring you get the most out of your driving experience.
Why Upgrade to H&R Suspension?
The H&R Suspension Kit is designed to improve handling, stability, and ride comfort. Here are some benefits of upgrading:
- Improved Handling: The kit lowers the center of gravity, providing better cornering and responsiveness.
- Enhanced Stability: Reduces body roll during turns, making your driving experience more controlled.
- Better Aesthetics: Lowering your vehicle improves its stance and overall appearance.
- Adjustable Settings: Many kits allow you to fine-tune the suspension to your preference.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- H&R Suspension Kit
- Jack and jack stands
- Socket set
- Wrench set
- Torque wrench
- Spring compressor
- Safety glasses
- Gloves
Step-by-Step Installation Guide
1. Prepare Your Audi S4
Begin by parking your Audi S4 on a flat surface and engaging the parking brake. Gather all your tools and materials before starting the installation.
2. Lift the Vehicle
Using a jack, lift the front or rear of the vehicle, depending on which suspension you are working on. Secure the car with jack stands to ensure safety while you work.
3. Remove the Wheels
Take off the wheels to access the suspension components. Use a socket wrench to remove the lug nuts and set the wheels aside.
4. Disconnect the Old Suspension
Carefully disconnect the old suspension components. This typically involves removing bolts from the struts and sway bar links. Keep track of all hardware for reinstallation.
5. Install the H&R Suspension Kit
Using a spring compressor, safely compress the old springs before removing them. Install the new H&R springs and struts according to the manufacturer’s instructions. Make sure to torque all bolts to the specified settings.
6. Reinstall the Wheels
Once the new suspension is installed, carefully place the wheels back on the vehicle. Hand-tighten the lug nuts to secure them before lowering the car.
7. Lower the Vehicle
Remove the jack stands and lower your Audi S4 back to the ground. Once it is stable, use a torque wrench to tighten the lug nuts to the proper specifications.
8. Test Drive
After installation, take your Audi S4 for a test drive. Pay attention to how the vehicle handles and make any necessary adjustments to the suspension settings.
Conclusion
Installing a H&R Suspension Kit on your Audi S4 can greatly enhance its handling and performance for around $1,200. With the right tools and careful installation, you can enjoy a more responsive and enjoyable driving experience.