Table of Contents
Installing a Jackson Racing Supercharger (SC) on your Honda S2000 can significantly enhance its performance. This guide will walk you through the entire process, ensuring that you have a clear understanding of each step involved. Follow these instructions carefully to achieve optimal results.
Tools and Materials Needed
- Jackson Racing Supercharger Kit
- Socket set
- Wrenches
- Torque wrench
- Phillips and flathead screwdrivers
- Vacuum line removal tool
- Fuel line disconnect tool
- Engine oil
- Coolant
- Gaskets and seals (included in the kit)
Preparation Steps
Before starting the installation, ensure that you have a clean workspace and all necessary tools and materials at hand. Here are the preparation steps you should follow:
- Disconnect the negative battery terminal to prevent any electrical issues.
- Drain the engine coolant and oil to avoid spills during the installation.
- Remove the intake and engine cover to access the engine components.
Removing the Stock Components
The next step involves removing the stock components that will be replaced by the supercharger. Follow these instructions:
- Remove the stock intake manifold by unscrewing the bolts and disconnecting the necessary vacuum lines.
- Take off the throttle body and set it aside carefully.
- Disconnect the fuel lines using the fuel line disconnect tool.
- Remove any other components that obstruct access to the supercharger installation area.
Installing the Jackson Racing Supercharger
Now that the stock components are removed, you can begin installing the Jackson Racing Supercharger. Follow these steps closely:
- Position the supercharger in place and secure it using the provided bolts.
- Reconnect the throttle body to the supercharger, ensuring a tight fit.
- Install the new intake manifold that comes with the supercharger kit.
- Reconnect all vacuum lines and electrical connectors that were disconnected earlier.
Connecting the Fuel System
With the supercharger in place, it’s time to reconnect the fuel system. Follow these instructions:
- Reconnect the fuel lines securely to the new fuel rail on the supercharger.
- Ensure that all connections are tight to prevent any fuel leaks.
- Check the fuel pressure regulator and adjust it if necessary, according to the supercharger kit instructions.
Reinstalling Components
After the supercharger and fuel system are connected, it’s time to reinstall the components you removed earlier:
- Reattach the throttle body, making sure it is aligned properly.
- Install the engine cover and any other components that were removed.
- Reconnect the negative battery terminal.
Final Checks and Testing
Before starting the engine, perform the following checks:
- Check all connections for tightness and ensure there are no leaks in the fuel system.
- Refill the engine oil and coolant to the appropriate levels.
- Double-check that all tools are removed from the engine bay.
Starting the Engine
With everything in place, it’s time to start the engine:
- Turn the key to the “on” position and wait for the fuel pump to prime.
- Start the engine and listen for any unusual noises.
- Check the dashboard for warning lights and monitor the engine’s performance.
Tuning the Supercharger
After installation, tuning is essential to ensure optimal performance:
- Use a tuning software compatible with your S2000 to adjust the engine parameters.
- Monitor air-fuel ratios and make necessary adjustments.
- Consider a dyno session to measure performance gains and finalize tuning.
Conclusion
Installing a Jackson Racing Supercharger on your S2000 can transform your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the enhanced performance of your vehicle. Always remember to follow up with regular maintenance and tuning to keep your supercharger running smoothly.