Table of Contents
Installing a JRi Coilover Kit is an excellent way to enhance the handling and stance of your vehicle without breaking the bank. For approximately $1,200, you can significantly improve your car’s performance and aesthetics.
What is a Coilover Kit?
A coilover kit is a type of suspension system that combines a coil spring and shock absorber into a single unit. This setup allows for adjustable ride height and improved handling characteristics, making it a popular choice among car enthusiasts.
Benefits of Installing a JRi Coilover Kit
- Improved Handling: The JRi Coilover Kit provides better suspension response, reducing body roll during cornering.
- Adjustable Ride Height: Customize your vehicle’s stance to achieve the desired look and performance.
- Enhanced Performance: Designed for track and street use, these coilovers improve overall driving dynamics.
- Durability: Made from high-quality materials, JRi coilovers are built to withstand harsh driving conditions.
Tools and Materials Needed
Before starting the installation process, gather the following tools and materials:
- JRi Coilover Kit
- Jack and jack stands
- Socket set
- Wrench set
- Screwdriver set
- Torque wrench
- Spring compressor (if necessary)
- Safety glasses and gloves
Step-by-Step Installation Process
1. Prepare Your Vehicle
Start by parking your vehicle on a flat surface and engaging the parking brake. Loosen the lug nuts on the wheels where you will be installing the coilovers.
2. Lift the Vehicle
Use a jack to lift the front or rear of the vehicle, depending on where you are starting. Secure the vehicle with jack stands to ensure safety while you work.
3. Remove the Wheels
Once the vehicle is securely lifted, remove the lug nuts and take off the wheels to access the suspension components.
4. Remove the Stock Suspension
Locate the stock struts and disconnect them from the vehicle. This typically involves removing bolts at the top and bottom of the strut assembly. Take care to support the suspension components as you remove the struts.
5. Install the JRi Coilovers
Position the JRi coilovers in place of the stock struts. Ensure that all mounting points align correctly. Reinstall the bolts and tighten them to the manufacturer’s specifications using a torque wrench.
6. Adjust Ride Height
Before reattaching the wheels, adjust the ride height of the coilovers to your desired setting. Make sure to check the manufacturer’s recommendations for optimal performance.
7. Reinstall the Wheels
Once the coilovers are installed and adjusted, put the wheels back on the vehicle. Hand-tighten the lug nuts before lowering the vehicle back to the ground.
8. Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the vehicle is on the ground, fully tighten the lug nuts in a crisscross pattern to ensure even pressure.
9. Test Drive
After the installation, take the vehicle for a test drive to ensure everything is functioning correctly. Pay attention to the handling and make any necessary adjustments to the ride height or damping settings.
Conclusion
Installing a JRi Coilover Kit can dramatically enhance your vehicle’s handling and appearance for a reasonable price. By following these steps, you can achieve a professional-level installation and enjoy the benefits of improved performance.