Installing a Jwt Pop-chip Exhaust on Your Infiniti G35: Costs, Steps, and Performance Boosts

by

The Infiniti G35 is a popular choice among car enthusiasts for its performance and sleek design. One of the modifications that can significantly enhance its performance is the installation of a JWT Pop-Chip Exhaust. This article will guide you through the costs, steps, and performance boosts associated with this upgrade.

Understanding the JWT Pop-Chip Exhaust

The JWT Pop-Chip Exhaust is designed to improve the exhaust flow of your Infiniti G35, resulting in better engine performance. The exhaust system not only enhances the vehicle’s sound but also contributes to increased horsepower and torque.

Costs of Installing a JWT Pop-Chip Exhaust

Before diving into the installation process, it’s essential to understand the costs involved. The expenses can vary based on several factors, including the type of exhaust system you choose and whether you plan to install it yourself or hire a professional.

  • Exhaust System Cost: The price of a JWT Pop-Chip Exhaust typically ranges from $600 to $1,200.
  • Installation Costs: If you choose to have it professionally installed, labor costs can add an additional $100 to $300.
  • Tools and Supplies: If you are installing it yourself, you may need to budget for tools and supplies, which can cost around $50 to $100.

Steps to Install the JWT Pop-Chip Exhaust

Installing the JWT Pop-Chip Exhaust can be a rewarding project. Below are the steps to guide you through the installation process.

  • Step 1: Gather Your Tools – You will need a socket set, wrenches, a jack, and jack stands.
  • Step 2: Lift the Vehicle – Use a jack to lift your G35 and secure it with jack stands.
  • Step 3: Remove the Old Exhaust – Start by removing the bolts that hold the old exhaust system in place. Be sure to disconnect any sensors as needed.
  • Step 4: Install the JWT Pop-Chip Exhaust – Position the new exhaust system and secure it with the provided hardware. Ensure that all connections are tight.
  • Step 5: Reconnect Sensors – If you disconnected any sensors, make sure to reconnect them properly.
  • Step 6: Lower the Vehicle – Carefully remove the jack stands and lower your G35 back to the ground.
  • Step 7: Test the Exhaust – Start your engine and listen for any unusual noises. Check for leaks around the connections.

Performance Boosts from the JWT Pop-Chip Exhaust

Installing a JWT Pop-Chip Exhaust can lead to several performance enhancements for your Infiniti G35. Here are some of the key benefits you can expect:

  • Increased Horsepower: The improved exhaust flow can lead to a noticeable increase in horsepower, enhancing your vehicle’s acceleration.
  • Improved Torque: Along with horsepower, you may experience a boost in torque, making your G35 more responsive on the road.
  • Enhanced Sound: The JWT Pop-Chip Exhaust provides a more aggressive exhaust note, giving your G35 a sportier sound.
  • Better Fuel Efficiency: Improved exhaust flow can also lead to better fuel efficiency, allowing you to get more miles per gallon.

Conclusion

Installing a JWT Pop-Chip Exhaust on your Infiniti G35 is a worthwhile investment for any car enthusiast. With the right tools and a bit of patience, you can enhance your vehicle’s performance and enjoy the benefits of improved horsepower, torque, and sound. Whether you choose to tackle the installation yourself or hire a professional, the upgrade is sure to elevate your driving experience.