Table of Contents
Upgrading your Audi TTRS with a K&N cold air intake can significantly enhance its performance. This article provides a detailed, step-by-step guide to help you through the installation process.
What You Will Need
- K&N Cold Air Intake Kit
- Socket Set
- Screwdriver Set
- Torque Wrench
- Shop Towels
- Safety Glasses
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and components. Park your Audi TTRS on a flat surface, and engage the parking brake for safety.
Step 1: Disconnect the Battery
To avoid any electrical issues, disconnect the negative terminal of the battery using a socket wrench. This will ensure safety during the installation process.
Step 2: Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift off the cover and set it aside to access the intake system.
Step 3: Remove the Factory Air Intake
Loosen the clamps on the factory air intake using a screwdriver. Disconnect any air temperature sensors and remove the intake tubing from the throttle body. Take care to keep all components for reinstallation if needed.
Installing the K&N Cold Air Intake
Step 4: Prepare the K&N Intake System
Unbox your K&N cold air intake kit and familiarize yourself with the components. Ensure you have all parts listed in the instruction manual.
Step 5: Install the New Intake Tube
Attach the new intake tube to the throttle body. Make sure it fits snugly and secure it with the provided clamps. Ensure the air temperature sensor is properly connected.
Step 6: Position the Air Filter
Place the K&N air filter in the designated location within the engine bay. Ensure it is secured and that there are no gaps for unfiltered air to enter.
Final Steps
Step 7: Reinstall the Engine Cover
Once the intake system is securely in place, reinstall the engine cover by aligning it and tightening the bolts with a socket wrench.
Step 8: Reconnect the Battery
Reconnect the negative battery terminal and ensure it is tight. This will restore power to your vehicle.
Step 9: Start the Engine
Start your Audi TTRS and listen for any unusual sounds. Allow the engine to idle for a few minutes to ensure everything is functioning correctly.
Performance Improvements
After installation, you should notice improved throttle response and potentially better fuel efficiency. The K&N cold air intake allows for a higher volume of cooler air, which enhances combustion and overall engine performance.
Maintenance Tips
To maintain optimal performance, regularly check and clean the K&N air filter according to the manufacturer’s recommendations. This will ensure your engine continues to breathe efficiently.
Conclusion
Installing a K&N cold air intake on your Audi TTRS is a straightforward process that can yield significant performance benefits. With the right tools and careful attention to detail, you can enhance your driving experience.