Installing a K&n Drop-in Air Filter on Your Rsx Type S: Step-by-step Performance Benefits

by

Installing a K&N Drop-In Air Filter on Your RSX Type S: Step-by-Step Performance Benefits

Upgrading your RSX Type S with a K&N drop-in air filter can significantly enhance its performance. This article will guide you through the installation process and outline the benefits of making this change.

Why Choose a K&N Drop-In Air Filter?

K&N air filters are known for their high-flow design and superior filtration capabilities. Here are some reasons to consider this upgrade:

  • Improved Airflow: K&N filters allow more air to enter the engine, which can lead to better combustion.
  • Increased Horsepower: Enhanced airflow can result in a noticeable increase in horsepower.
  • Reusable: K&N filters are washable and reusable, making them a cost-effective choice in the long run.
  • Environmental Benefits: Using a reusable filter reduces waste compared to disposable filters.

Tools and Materials Needed

Before starting the installation, gather the following tools and materials:

  • New K&N drop-in air filter
  • Socket wrench set
  • Screwdriver set
  • Cleaning cloth
  • Vacuum cleaner (optional)

Step-by-Step Installation Guide

Step 1: Prepare Your Vehicle

Ensure your RSX Type S is parked on a flat surface and the engine is cool. Open the hood and secure it with the prop rod.

Step 2: Remove the Engine Cover (if applicable)

If your vehicle has an engine cover, use a socket wrench to remove the bolts securing it. Carefully lift off the cover and set it aside.

Step 3: Locate the Air Filter Box

The air filter box is usually located near the front of the engine bay. Identify the clips or screws that hold it in place.

Step 4: Open the Air Filter Box

Release the clips or remove the screws to open the air filter box. Carefully lift the cover to access the old air filter.

Step 5: Remove the Old Air Filter

Take out the old air filter from the box. If it’s dirty, consider using a vacuum cleaner to clean any debris inside the box.

Step 6: Install the K&N Drop-In Air Filter

Place the new K&N drop-in air filter into the air filter box. Ensure it fits snugly and seals properly.

Step 7: Reassemble the Air Filter Box

Close the air filter box cover and secure it with the clips or screws you removed earlier. Make sure everything is tightly fastened.

Step 8: Reinstall the Engine Cover (if applicable)

If you removed an engine cover, place it back on and secure it with the bolts.

Step 9: Start Your Engine

Turn on the engine and let it idle for a few minutes. Listen for any unusual sounds and check for leaks around the air filter box.

Performance Benefits After Installation

Once the K&N drop-in air filter is installed, you may notice several performance enhancements:

  • Better Acceleration: With improved airflow, your RSX Type S may accelerate more quickly.
  • Enhanced Throttle Response: A new air filter can provide sharper throttle response during driving.
  • Increased Fuel Efficiency: Better combustion can lead to improved fuel economy.

Maintenance Tips for Your K&N Air Filter

To ensure optimal performance, follow these maintenance tips:

  • Regular Cleaning: Clean the filter every 50,000 miles or as needed, using K&N cleaning kits.
  • Inspect for Damage: Check the filter for any tears or damage during routine maintenance.
  • Monitor Engine Performance: Pay attention to any changes in engine performance that may indicate a need for cleaning or replacement.

Conclusion

Installing a K&N drop-in air filter on your RSX Type S is a straightforward process that can yield significant performance benefits. With improved airflow, increased horsepower, and better fuel efficiency, this upgrade is worth considering for any RSX Type S owner.