Installing a K&n High-flow Intake on Your Honda Accord: Step-by-step Guide with Estimated $250 Cost

by

The K&N High-Flow Intake system is a popular upgrade for Honda Accord owners looking to enhance their vehicle’s performance. This guide provides a detailed, step-by-step approach to installing the intake system, with an estimated cost of around $250.

What You Will Need

  • K&N High-Flow Intake Kit
  • Socket wrench set
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • Protective gloves
  • Safety glasses

Before starting the installation, make sure you have all the necessary tools and components. Having everything ready will make the process smoother and more efficient.

Preparation Steps

Preparation is key to a successful installation. Follow these steps to get started:

  • Park your Honda Accord on a flat surface and engage the parking brake.
  • Disconnect the battery by removing the negative terminal.
  • Allow the engine to cool completely before beginning work.

Removing the Stock Air Intake

To install the K&N High-Flow Intake, you first need to remove the stock air intake system. Follow these steps:

  • Locate the air intake assembly, which is typically found at the front of the engine bay.
  • Using a socket wrench, remove the bolts securing the air intake to the engine.
  • Disconnect any electrical connectors attached to the air intake.
  • Loosen the hose clamps using a flathead screwdriver and carefully detach the intake from the throttle body.
  • Remove the entire stock air intake assembly from the engine bay.

Installing the K&N High-Flow Intake

With the stock intake removed, you can now install the K&N High-Flow Intake. Follow these steps:

  • Begin by placing the K&N intake tube into the engine bay, aligning it with the throttle body.
  • Secure the intake tube to the throttle body using the provided hose clamp.
  • Attach any necessary sensors or connectors to the new intake system.
  • Position the K&N air filter at the end of the intake tube and secure it in place with a hose clamp.
  • Recheck all connections and ensure everything is tight and secure.

Final Steps

After installing the K&N High-Flow Intake, complete these final steps:

  • Reconnect the negative terminal of the battery.
  • Start the engine and listen for any unusual sounds.
  • Check for any leaks around the intake connections.
  • Take the vehicle for a short test drive to ensure everything is functioning properly.

Estimated Costs

The estimated cost for this installation is around $250. This includes:

  • K&N High-Flow Intake Kit: Approximately $200
  • Tools (if not already owned): Approximately $50

Conclusion

Installing a K&N High-Flow Intake on your Honda Accord can significantly improve engine performance and efficiency. By following this step-by-step guide, you can complete the installation yourself while keeping costs manageable. Enjoy the enhanced driving experience!