Table of Contents
The AMG GT is a stunning vehicle known for its performance and luxury. Upgrading the suspension with a KW coilover kit can significantly enhance handling and ride quality. This guide will walk you through the installation process step-by-step.
Tools and Materials Needed
- KW Coilover Kit
- Jack and Jack Stands
- Socket Set
- Torque Wrench
- Spring Compressors
- Flathead and Phillips Screwdrivers
- Wrenches
- Rubber Mallet
- Safety Glasses
Preparation
Before starting the installation, ensure you have all the necessary tools and materials. Make sure to work in a well-ventilated area and wear safety glasses for protection.
Step 1: Lift the Vehicle
Using a jack, lift the front of the AMG GT and secure it with jack stands. Repeat this process for the rear of the vehicle. Ensure the car is stable before proceeding.
Step 2: Remove the Wheels
Using a socket set, remove the lug nuts and take off the wheels. This will provide access to the suspension components.
Step 3: Remove the Stock Suspension
Start with the front suspension. Locate the top strut bolts and lower control arm bolts. Remove these bolts using the appropriate socket and wrench.
Once the bolts are removed, carefully detach the strut from the vehicle. You may need to use a rubber mallet to free it from any tight spots.
Step 4: Install the KW Coilover
Begin by assembling the KW coilover according to the manufacturer’s instructions. Use spring compressors to compress the coil spring if necessary.
Position the coilover in place and secure it with the bolts you previously removed. Ensure everything is tightened to the manufacturer’s specifications using a torque wrench.
Step 5: Repeat for the Rear Suspension
Follow the same process for the rear suspension. Remove the rear struts and install the KW coilovers, ensuring all bolts are tightened securely.
Step 6: Reinstall the Wheels
Once both front and rear coilovers are installed, it’s time to reinstall the wheels. Place them back on the hubs and hand-tighten the lug nuts.
Step 7: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the car is on the ground, use the torque wrench to fully tighten the lug nuts in a star pattern.
Step 8: Adjust the Ride Height
With the vehicle on the ground, you can now adjust the ride height of the coilovers. Refer to the KW instructions for specific adjustment methods.
Step 9: Test Drive
After installation and adjustment, take the AMG GT for a test drive. Pay attention to the handling and ride quality. Make any necessary adjustments to the coilovers based on your driving experience.
Conclusion
Installing a KW coilover kit on your AMG GT can greatly improve performance and aesthetics. By following this step-by-step guide, you can complete the installation yourself and enjoy enhanced driving dynamics.