Table of Contents
Installing a new exhaust system on your Mazda Miata can enhance performance and sound while providing a rewarding DIY experience. This guide will walk you through the steps to successfully install a Mazda Miata exhaust.
Tools and Materials Needed
- New exhaust system
- Socket wrench set
- Jack and jack stands
- Rubber mallet
- Exhaust hanger removal tool
- Safety glasses
- Gloves
Before starting, ensure you have all the necessary tools and materials ready. This will make the installation process smoother and more efficient.
Step 1: Prepare Your Vehicle
Begin by parking your Mazda Miata on a flat surface and engaging the parking brake. Use a jack to lift the rear of the vehicle and securely place jack stands underneath for safety.
Step 2: Remove the Old Exhaust System
Using a socket wrench, loosen and remove the bolts securing the exhaust system to the catalytic converter and the rear of the vehicle.
Next, use the exhaust hanger removal tool to detach the exhaust hangers from the rubber mounts. Gently tap the exhaust with a rubber mallet if needed to free it from any stubborn hangers.
Once all bolts and hangers are removed, carefully take out the old exhaust system from the vehicle.
Step 3: Install the New Exhaust System
Begin by positioning the new exhaust system in place. Start with the front section, aligning it with the catalytic converter.
Secure the front section using the bolts you previously removed. Make sure to tighten them adequately but avoid over-tightening, which can damage the exhaust.
Next, attach the rear section of the exhaust to the hangers. Use the rubber mallet to ensure it fits snugly into place.
Step 4: Check Your Work
Once the new exhaust system is installed, take a moment to double-check all connections. Ensure that all bolts are tightened and that the exhaust is securely mounted to the hangers.
Step 5: Lower the Vehicle
Carefully lower the vehicle back to the ground by removing the jack stands and slowly lowering the jack. Once the vehicle is back on the ground, remove the jack.
Step 6: Test the Exhaust System
Start your Mazda Miata and listen for any unusual noises. Check for leaks around the joints and ensure that the exhaust is functioning properly.
Conclusion
Installing a new exhaust system on your Mazda Miata can be a fulfilling project that enhances your vehicle’s performance and sound. By following these steps, you can ensure a successful installation.