Table of Contents
The Audi RS7 is known for its powerful performance and sleek design, but many enthusiasts seek to enhance its sound and power even further. One popular modification is the installation of a Milltek Sport Cat-back exhaust system. This article will guide you through the process of installing a Milltek Sport Cat-back exhaust on your Audi RS7, providing you with improved sound and performance.
Why Choose a Milltek Sport Cat-back Exhaust?
Milltek Sport is a renowned brand in the aftermarket exhaust market, known for its high-quality materials and craftsmanship. Here are some reasons why you might consider their Cat-back exhaust for your Audi RS7:
- Enhanced Sound: The Milltek exhaust system offers a deeper, more aggressive tone compared to the stock exhaust.
- Improved Performance: The free-flowing design can lead to better exhaust flow, improving horsepower and torque.
- Lightweight Construction: Made from high-quality materials, the Milltek exhaust is lighter than the factory system.
- Custom Fit: Designed specifically for the Audi RS7, ensuring a perfect fit and finish.
Tools Needed for Installation
Before you start the installation, make sure you have the following tools on hand:
- Socket set (including 13mm and 15mm sockets)
- Ratchet and extension
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
Installation Steps
Step 1: Prepare the Vehicle
Start by parking your Audi RS7 on a flat surface. Set the parking brake and wear safety glasses and gloves. Use a jack to lift the rear of the vehicle and secure it with jack stands.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system. Using your socket set, remove the bolts securing the exhaust to the exhaust manifold and any hangers holding the exhaust in place. Carefully slide the exhaust out from under the vehicle.
Step 3: Install the Milltek Cat-back Exhaust
Begin by positioning the Milltek Cat-back exhaust under the vehicle. Align the exhaust with the mounting points and hangers. Slide the exhaust into place, ensuring it fits snugly against the exhaust manifold.
Step 4: Secure the Exhaust
Using your socket set, tighten the bolts to secure the Milltek exhaust to the exhaust manifold. Make sure to follow the manufacturer’s torque specifications for a secure fit. Check that all hangers are properly aligned and secured.
Step 5: Final Checks
Once everything is secured, double-check all bolts and hangers. Lower the vehicle and start the engine to listen for any unusual noises. If everything sounds good, take the car for a short drive to ensure proper performance.
Benefits of Upgrading to Milltek Exhaust
After installation, you will notice several benefits from upgrading to a Milltek Sport Cat-back exhaust:
- Improved Engine Response: A less restrictive exhaust allows for quicker engine response.
- Enhanced Driving Experience: The aggressive sound adds excitement to your driving experience.
- Increased Resale Value: Quality aftermarket parts can increase the appeal of your vehicle.
Conclusion
Installing a Milltek Sport Cat-back exhaust on your Audi RS7 is a great way to enhance both sound and performance. With the right tools and a bit of patience, you can enjoy the benefits of this upgrade in no time. Enjoy your new exhaust note and the added power on your driving adventures!