Table of Contents
The Mopar Challenger is a powerful muscle car that deserves an equally impressive exhaust system. Upgrading to a Mopar Challenger exhaust system not only enhances the vehicle’s sound but also improves performance. This step-by-step guide will help you install your new exhaust system for optimal sound and power.
Tools and Materials Needed
- Mopar Challenger exhaust system kit
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Exhaust hanger removal tool
- Lubricant spray
Preparation for Installation
Before starting the installation, ensure that you have all the necessary tools and materials. It’s essential to work in a well-ventilated area and wear safety gear, including gloves and safety glasses.
Step 1: Lift the Vehicle
Use a jack to lift the front of the vehicle and secure it with jack stands. This will provide you with enough space to work comfortably underneath the car.
Step 2: Remove the Old Exhaust System
Start by spraying lubricant on the exhaust hangers to make removal easier. Use the exhaust hanger removal tool to detach the hangers from the old exhaust. Once the hangers are free, use your socket set to unbolt the exhaust system from the catalytic converter and the muffler.
Step 3: Prepare the New Exhaust System
Unbox your new Mopar Challenger exhaust system and lay out all components. Familiarize yourself with the parts to ensure a smooth installation process.
Step 4: Install the New Exhaust System
Begin by connecting the new exhaust system to the catalytic converter. Make sure to align the pipes correctly and secure them with bolts. Next, attach the muffler to the exhaust pipes, ensuring a snug fit.
Step 5: Secure the Exhaust System
Once the exhaust system is in place, reattach the hangers to secure the system firmly. Double-check all connections and bolts to ensure everything is tight and properly aligned.
Final Steps
After the installation is complete, lower the vehicle back to the ground. Start the engine and listen for any unusual sounds. If everything sounds good, take the car for a short drive to test the performance of the new exhaust system.
Benefits of Upgrading Your Exhaust System
Installing a Mopar Challenger exhaust system offers several benefits:
- Improved Sound: Enjoy a deeper, more aggressive exhaust note.
- Enhanced Performance: Experience better throttle response and horsepower gains.
- Increased Fuel Efficiency: A more efficient exhaust can lead to better fuel economy.
- Durability: Mopar products are designed for longevity and reliability.
Conclusion
Upgrading to a Mopar Challenger exhaust system is a rewarding project that can enhance your driving experience. By following this step-by-step guide, you can install your new exhaust system confidently, ensuring optimal sound and performance. Enjoy the roar of your newly upgraded Challenger!