Table of Contents
Upgrading your vehicle’s throttle body can significantly enhance its performance. The Moroso 80mm throttle body is a popular choice among car enthusiasts looking to increase horsepower. In this article, we will guide you through the step-by-step process of installing a Moroso 80mm throttle body, which can lead to an impressive 18 horsepower increase.
Tools and Materials Needed
- Moroso 80mm Throttle Body
- Socket set
- Torque wrench
- Gasket scraper
- Throttle body gasket
- Clean rags
- Engine cleaner
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials. It’s essential to work in a clean environment to prevent any debris from entering the engine.
1. Safety First
Always wear safety glasses and gloves to protect yourself from any debris or chemicals. Ensure the engine is cool before beginning the installation process.
2. Disconnect the Battery
Start by disconnecting the negative terminal of the battery to prevent any electrical short circuits while you work on the throttle body.
Removing the Old Throttle Body
With the preparations complete, it’s time to remove the old throttle body. Follow these steps carefully.
1. Locate the Throttle Body
The throttle body is typically located between the air intake and the intake manifold. Consult your vehicle’s manual if you’re having trouble finding it.
2. Remove the Air Intake Hose
Loosen the clamps securing the air intake hose to the throttle body and carefully remove it. Set it aside to access the throttle body.
3. Disconnect Electrical Connectors
Unplug any electrical connectors attached to the throttle body. Make sure to remember their positions for reinstallation.
4. Remove the Throttle Body Bolts
Using a socket set, remove the bolts securing the throttle body to the intake manifold. Keep these bolts as you will need them for the new throttle body.
5. Clean the Mounting Surface
Once the throttle body is removed, use a gasket scraper and engine cleaner to clean the mounting surface on the intake manifold. Ensure no old gasket material remains.
Installing the Moroso 80mm Throttle Body
Now that the old throttle body is removed, you can proceed with the installation of the Moroso 80mm throttle body.
1. Place the New Gasket
Position the new throttle body gasket onto the clean mounting surface, ensuring it aligns with the bolt holes.
2. Install the New Throttle Body
Carefully place the Moroso 80mm throttle body onto the gasket. Align it with the bolt holes and ensure it sits flat against the gasket.
3. Secure the Throttle Body
Using the original bolts, secure the throttle body to the intake manifold. Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
4. Reconnect Electrical Connectors
Reconnect all electrical connectors to the throttle body, ensuring they are securely plugged in.
5. Reattach the Air Intake Hose
Reattach the air intake hose to the throttle body and tighten the clamps to secure it in place.
Final Steps
With the new throttle body installed, it’s time to complete the process and get your vehicle ready for a test drive.
1. Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is tight and secure.
2. Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks or irregular noises.
3. Test Drive
Take your vehicle for a test drive to experience the performance increase. You should notice improved throttle response and power output.
Conclusion
Installing a Moroso 80mm throttle body can provide a significant boost in horsepower. By following this step-by-step guide, you can enhance your vehicle’s performance efficiently and safely. Enjoy the added power and improved driving experience!