Installing a Motordyne Art Exhaust on the Q50 Red Sport: Costs, Steps, and Sound Tests

by

Installing a Motordyne ART Exhaust on the Q50 Red Sport is a popular modification among enthusiasts looking to enhance their vehicle’s performance and sound. This article will guide you through the costs, steps involved in the installation, and sound tests to evaluate the exhaust system.

Understanding the Motordyne ART Exhaust

The Motordyne ART Exhaust is designed to provide a balance of performance and sound. It is known for its unique design, which helps improve exhaust flow and reduce back pressure, leading to enhanced power output. Additionally, the exhaust system is crafted to produce a deep, aggressive tone that many car enthusiasts desire.

Costs Involved

Before diving into the installation process, it’s essential to consider the costs associated with purchasing and installing the Motordyne ART Exhaust.

  • Cost of the Motordyne ART Exhaust: $1,200 – $1,500
  • Installation Labor (if not DIY): $200 – $400
  • Additional Tools and Materials: $50 – $100

Overall, you can expect to spend between $1,450 and $2,000 for the entire process, depending on whether you choose to install it yourself or hire a professional.

Steps to Install the Motordyne ART Exhaust

Installing the Motordyne ART Exhaust requires a few tools and some mechanical knowledge. Here’s a step-by-step guide to help you through the process.

Tools Needed

  • Jack and jack stands
  • Socket set
  • Wrenches
  • Torque wrench
  • Cutting tool (if necessary)
  • Safety goggles and gloves

Installation Steps

  • Prepare the Vehicle: Park the Q50 on a flat surface, engage the parking brake, and disconnect the battery.
  • Lift the Vehicle: Use a jack to lift the car and secure it with jack stands.
  • Remove the Stock Exhaust: Unbolt the factory exhaust system starting from the rear and work your way forward. Be cautious with any hangers that may need to be removed.
  • Install the Motordyne ART Exhaust: Position the new exhaust system in place, ensuring all flanges align properly. Bolt it securely, following the manufacturer’s torque specifications.
  • Reinstall Hangers: Make sure all exhaust hangers are reattached to prevent any vibrations or rattling.
  • Reconnect the Battery: Once everything is in place, reconnect the battery and lower the vehicle.

Sound Tests and Evaluation

After installation, it’s time to evaluate the sound produced by the Motordyne ART Exhaust. Sound tests can be performed in various conditions to assess performance.

Sound Test Procedures

  • Idle Sound Test: Start the engine and let it idle. Listen for any unusual noises and note the exhaust tone.
  • Rev Test: Gradually rev the engine while stationary and listen for the sound characteristics at different RPMs.
  • Drive Test: Take the vehicle for a short drive, paying attention to sound levels during acceleration and deceleration.

Evaluating Performance

After conducting sound tests, evaluate the performance based on your preferences. Consider the following:

  • Is the sound aggressive enough for your taste?
  • Does it drone at highway speeds?
  • Is there a noticeable increase in performance?

Feedback from these evaluations can help you determine if the Motordyne ART Exhaust meets your expectations.

Conclusion

Installing a Motordyne ART Exhaust on the Q50 Red Sport is a rewarding modification that can enhance both the performance and sound of your vehicle. By understanding the costs, following the installation steps, and conducting thorough sound tests, you can ensure that your upgrade is successful and enjoyable.