Table of Contents
The AMC Javelin is a classic muscle car that has captured the hearts of many automotive enthusiasts. If you’re looking to boost your Javelin’s horsepower significantly, installing a nitrous oxide system can provide an impressive increase of over 100 horsepower. This article will guide you through the step-by-step process of installing a nitrous oxide system on your AMC Javelin, with an estimated cost of around $1,200.
Understanding Nitrous Oxide Systems
Nitrous oxide (N2O) is a colorless gas commonly used in automotive applications to enhance engine performance. When injected into the engine, it allows for more fuel to be burned, resulting in increased power output. Here are some key components of a nitrous oxide system:
- Nitrous Oxide Bottle
- Solenoid
- Distribution Lines
- Nozzle
- Activation Switch
Tools and Materials Needed
Before you begin the installation, gather the necessary tools and materials to ensure a smooth process:
- Socket set
- Wrenches
- Drill
- Drill bits
- Nitrous oxide kit
- Safety goggles
- Gloves
- Wire connectors
Step-by-Step Installation Guide
Step 1: Preparing the Vehicle
Begin by ensuring your AMC Javelin is parked on a flat surface and the engine is off. Disconnect the battery to prevent any electrical issues during installation. It’s also advisable to remove any components that may obstruct access to the engine bay.
Step 2: Mounting the Nitrous Bottle
Choose an appropriate location in the trunk for the nitrous oxide bottle. It should be secure and easily accessible. Use a mounting bracket to secure the bottle in place. Make sure the bottle is positioned upright to ensure proper gas flow.
Step 3: Installing the Solenoid and Lines
Next, install the solenoid in the engine bay. This component controls the flow of nitrous into the engine. Connect the distribution lines from the nitrous bottle to the solenoid, ensuring all connections are tight to prevent leaks.
Step 4: Installing the Nozzle
Drill a hole in the intake manifold or throttle body to install the nozzle. This is where the nitrous will be injected into the engine. Follow the manufacturer’s instructions for the correct size and placement of the nozzle. Secure it in place and connect the distribution line from the solenoid to the nozzle.
Step 5: Wiring the System
Run the electrical wires from the solenoid to the activation switch. The switch can be mounted on the dashboard or any convenient location within reach of the driver. Ensure all connections are secure and insulated to prevent shorts.
Step 6: Testing the System
Before taking your Javelin for a spin, it’s crucial to test the nitrous system. Reconnect the battery and check for any leaks in the lines and connections. Activate the system while monitoring the pressure gauge on the nitrous bottle. If everything checks out, you’re ready to hit the road!
Safety Considerations
While nitrous oxide can significantly enhance performance, it’s essential to prioritize safety. Here are some safety tips to consider:
- Always wear safety goggles and gloves during installation.
- Ensure the nitrous bottle is secured and upright.
- Never exceed the recommended horsepower increase for your engine.
- Consult a professional if you’re unsure about any steps.
Conclusion
Installing a nitrous oxide system on your AMC Javelin can be a rewarding project that enhances your vehicle’s performance significantly. With careful planning and execution, you can achieve a horsepower boost of over 100 HP for around $1,200. Always remember to prioritize safety and consult professionals when necessary. Enjoy the exhilarating ride!