Installing a Powercraft Turbo Downpipe on a Nissan Gt-r R35: Step-by-step Tutorial

by

Installing a Powercraft Turbo Downpipe on a Nissan GT-R R35: Step-by-Step Tutorial

The Nissan GT-R R35 is renowned for its performance and tuning potential. One of the most effective modifications to enhance its power is the installation of a Powercraft Turbo Downpipe. This tutorial will guide you through the installation process step-by-step, ensuring a successful upgrade to your vehicle.

Tools and Materials Needed

  • Powercraft Turbo Downpipe
  • Socket set
  • Torque wrench
  • Ratchet and extensions
  • Flathead and Phillips screwdrivers
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Heat-resistant silicone gasket maker (optional)

Preparation Steps

Before starting the installation, it is crucial to prepare your workspace and vehicle. Follow these steps:

  • Park your Nissan GT-R R35 on a flat surface.
  • Engage the parking brake for safety.
  • Disconnect the negative terminal of the battery to prevent electrical issues.
  • Raise the vehicle using a jack and secure it with jack stands.

Removing the Stock Downpipe

With the vehicle prepared, you can now remove the stock downpipe. Follow these steps carefully:

  • Locate the stock downpipe, which connects the turbocharger to the exhaust system.
  • Remove any heat shields or covers that may obstruct access to the downpipe.
  • Loosen and remove the bolts connecting the downpipe to the turbo using a socket set.
  • Disconnect any sensors or fittings attached to the downpipe.
  • Carefully remove the downpipe from the vehicle, ensuring no damage to surrounding components.

Installing the Powercraft Turbo Downpipe

Now that the stock downpipe is removed, it’s time to install the Powercraft Turbo Downpipe. Follow these steps:

  • Position the Powercraft Turbo Downpipe in place, ensuring it aligns with the turbo and exhaust system.
  • Reconnect any sensors or fittings that were previously disconnected.
  • Secure the downpipe to the turbo using the provided bolts, tightening them to the manufacturer’s specifications with a torque wrench.
  • If necessary, apply heat-resistant silicone gasket maker to ensure a proper seal.

Reassembling the Vehicle

Once the new downpipe is securely installed, it’s time to reassemble your vehicle. Follow these steps:

  • Reattach any heat shields or covers that were removed earlier.
  • Double-check all connections and bolts to ensure everything is secure.
  • Lower the vehicle from the jack stands and remove the jack.
  • Reconnect the negative terminal of the battery.

Testing the Installation

After the installation is complete, it’s essential to test the vehicle to ensure everything is functioning correctly:

  • Start the engine and listen for any unusual sounds that may indicate a leak or improper installation.
  • Check for any warning lights on the dashboard.
  • Take the vehicle for a test drive, monitoring performance and exhaust sound.

Final Thoughts

Installing a Powercraft Turbo Downpipe on your Nissan GT-R R35 can significantly enhance its performance. By following this step-by-step tutorial, you can ensure a successful installation and enjoy the benefits of improved exhaust flow and power. Always remember to perform regular maintenance and check for any issues after modifications.