Installing a Precision Turbo 5858 on Your Srt-4: Step-by-step Upgrade Process

by

Upgrading the turbocharger on your SRT-4 is an exciting modification that can significantly enhance performance. The Precision Turbo 5858 is a popular choice among enthusiasts for its excellent power output and responsiveness. In this article, we will walk you through the step-by-step process of installing a Precision Turbo 5858 on your SRT-4.

Tools and Materials Needed

  • Precision Turbo 5858
  • Turbocharger gaskets
  • Wastegate actuator
  • Socket set
  • Wrenches
  • Torque wrench
  • Boost gauge
  • Oil feed and return lines
  • Intercooler piping
  • Coolant and oil
  • Shop towels

Preparation Steps

Before you begin the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all the necessary tools and materials listed above. It’s also a good idea to disconnect the battery to prevent any electrical issues during the installation.

1. Remove the Stock Turbocharger

Start by removing the stock turbocharger. Follow these steps:

  • Remove the intake piping connected to the stock turbo.
  • Disconnect the oil feed and return lines.
  • Unbolt the turbo from the exhaust manifold.
  • Carefully remove the turbo from the engine bay.

2. Prepare the New Turbo

With the stock turbo removed, prepare the Precision Turbo 5858 for installation:

  • Check the turbo and ensure all components are included.
  • Install the new gaskets on the turbo mounting surface.
  • Attach the wastegate actuator to the turbo.

Installation Steps

3. Install the Precision Turbo 5858

Now it’s time to install the new turbocharger:

  • Carefully position the Precision Turbo 5858 in place.
  • Secure the turbo to the exhaust manifold using the appropriate bolts.
  • Torque the bolts to the manufacturer’s specifications.

4. Connect Oil and Coolant Lines

Next, connect the oil feed and return lines:

  • Attach the oil feed line to the turbo.
  • Connect the oil return line, ensuring a secure fit.
  • If your turbo requires coolant lines, connect those as well.

5. Install Intercooler Piping

With the turbo in place, install the intercooler piping:

  • Attach the intake piping to the turbo inlet.
  • Connect the outlet to the intercooler.
  • Ensure all clamps are tight to prevent leaks.

Final Steps

6. Reconnect Battery and Check Connections

Before starting the engine, double-check all connections:

  • Ensure all bolts are tightened.
  • Verify that oil and coolant lines are secure.
  • Reconnect the battery.

7. Start the Engine

With everything in place, start the engine:

  • Allow the engine to idle for a few minutes.
  • Check for any leaks around the turbo and lines.
  • Monitor oil pressure and coolant temperature.

8. Test Drive

Once you’re confident there are no leaks, take your SRT-4 for a test drive:

  • Start with light acceleration to ensure everything is functioning properly.
  • Gradually increase boost levels while monitoring performance.
  • Listen for any unusual noises that could indicate issues.

Conclusion

Installing a Precision Turbo 5858 on your SRT-4 can be a rewarding experience that enhances your vehicle’s performance. By following these step-by-step instructions, you can ensure a successful upgrade. Always remember to consult with a professional if you are unsure about any part of the installation process. Happy boosting!