Installing a Precision Turbo Pt5854 on Your Civic Type R: Step-by-step for 380 Hp

by

Installing a Precision Turbo PT5854 on your Civic Type R can significantly enhance its performance, allowing you to achieve up to 380 horsepower. This guide will walk you through the entire installation process step-by-step, ensuring you have all the necessary tools and knowledge to complete the job successfully.

Tools and Materials Needed

  • Precision Turbo PT5854
  • Turbo manifold
  • Wastegate
  • Intercooler kit
  • Fuel system upgrade (injectors and pump)
  • ECU tuning software
  • Basic hand tools (sockets, wrenches, screwdrivers)
  • Torque wrench
  • Oil and coolant
  • Gaskets and hardware

Preparation

Before starting the installation, ensure your Civic Type R is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation process.

Removing the Stock Turbo

Begin by removing the stock turbocharger from your Civic Type R. Follow these steps:

  • Remove the intake and exhaust piping connected to the stock turbo.
  • Disconnect the oil and coolant lines.
  • Unbolt the turbo from the manifold.
  • Carefully remove the turbo from the engine bay.

Installing the Precision Turbo PT5854

With the stock turbo removed, you can now install the Precision Turbo PT5854. Follow these steps:

  • Place the new turbo onto the manifold.
  • Secure the turbo with the appropriate hardware, ensuring a tight fit.
  • Reconnect the oil and coolant lines, making sure there are no leaks.
  • Attach the intake and exhaust piping to the new turbo.

Installing the Wastegate

The wastegate is a crucial component for regulating boost pressure. Here’s how to install it:

  • Mount the wastegate to the designated spot on the manifold.
  • Connect the necessary vacuum lines to the wastegate.
  • Ensure all connections are secure and leak-free.

Upgrading the Fuel System

To support the increased power, an upgraded fuel system is necessary. Follow these steps:

  • Replace the stock fuel injectors with higher flow injectors.
  • Install a high-performance fuel pump.
  • Ensure all fuel lines are properly connected and secure.

ECU Tuning

After installing the turbo and upgrading the fuel system, tuning the ECU is essential for optimal performance:

  • Connect your ECU tuning software to the vehicle.
  • Upload the appropriate tuning map for the Precision Turbo PT5854.
  • Adjust parameters to ensure the engine runs smoothly and efficiently.

Final Checks and Testing

Before taking your Civic Type R for a test drive, perform the following final checks:

  • Inspect all connections for leaks.
  • Check oil and coolant levels.
  • Ensure all tools are removed from the engine bay.

Taking It for a Spin

Once everything is checked, reconnect the battery and start the engine. Allow it to idle for a few minutes before taking it for a test drive. Monitor the boost levels and engine performance closely during your first drive.

Conclusion

Installing a Precision Turbo PT5854 on your Civic Type R can elevate your driving experience to new heights. By following this step-by-step guide, you can achieve impressive power gains while ensuring reliability and performance. Enjoy the thrill of your newly enhanced Civic Type R!