Installing a Procharger or Whipple Supercharger on Your Ram 1500 Trx: Step-by-step Guide

by

Installing a supercharger on your Ram 1500 TRX can significantly enhance its performance. This guide provides a detailed, step-by-step process for installing either a ProCharger or Whipple supercharger. Follow these instructions carefully to ensure a successful installation.

Tools and Materials Needed

  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Supercharger kit (ProCharger or Whipple)
  • Intercooler (if applicable)
  • Fuel injectors (if necessary)
  • Vacuum line
  • Coolant
  • Oil

Preparation Steps

Before you begin the installation, make sure to prepare your workspace and vehicle. Here are the steps to get started:

  • Ensure the vehicle is parked on a level surface.
  • Disconnect the battery to prevent any electrical issues.
  • Remove the engine cover and any components obstructing access to the engine.

Removing the Stock Components

To install the supercharger, you will need to remove certain stock components. Follow these steps:

  • Remove the intake manifold by unbolting it and carefully lifting it off.
  • Disconnect any electrical connectors and vacuum lines attached to the intake manifold.
  • Remove the throttle body from the intake manifold.

Installing the Supercharger

Now that the stock components are removed, you can begin installing the supercharger. Depending on whether you are using a ProCharger or Whipple, the steps may vary slightly, but the general process is as follows:

Installing the ProCharger

Follow these steps to install the ProCharger:

  • Mount the ProCharger bracket to the engine using the provided hardware.
  • Attach the ProCharger unit to the bracket securely.
  • Connect the intake piping from the supercharger to the throttle body.
  • Install the intercooler if your kit includes one, following the manufacturer’s instructions.

Installing the Whipple Supercharger

If you are installing a Whipple supercharger, use these steps:

  • Attach the Whipple supercharger to the intake manifold using the supplied bolts.
  • Connect the throttle body to the supercharger.
  • Install the necessary fuel injectors if required by your supercharger kit.
  • Ensure all connections are tight and secure.

Finalizing the Installation

Once the supercharger is installed, you need to finalize a few steps before starting the engine:

  • Reconnect all electrical connectors and vacuum lines that were removed.
  • Reinstall the intake manifold and throttle body.
  • Check all fluid levels, including coolant and oil, and top off as necessary.
  • Reconnect the battery.

Testing the Installation

Before taking your Ram 1500 TRX for a drive, it’s crucial to test the installation:

  • Start the engine and listen for any unusual noises.
  • Check for leaks around the supercharger and connections.
  • Monitor the engine temperature and ensure it operates within normal limits.

Conclusion

Installing a ProCharger or Whipple supercharger on your Ram 1500 TRX can dramatically improve its power and performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to consult the manufacturer’s instructions for specific details related to your supercharger kit.