Table of Contents
The FR-S is known for its sporty design and impressive handling, but one way to enhance its performance even further is by installing a Rotiform Aero Exhaust. This upgrade not only improves the car’s sound but also boosts its horsepower and torque. In this article, we will guide you through the step-by-step process of installing a Rotiform Aero Exhaust on your FR-S, ensuring you get the most out of your investment of approximately $800.
What You Will Need
- Rotiform Aero Exhaust Kit
- Socket wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Torque wrench
- Cutting tool (if necessary)
Before starting the installation, make sure you have all the necessary tools and equipment ready. This will help streamline the process and ensure that you do not encounter any delays.
Step 1: Prepare Your Vehicle
Begin by parking your FR-S on a flat surface. Engage the parking brake to prevent any movement during the installation. Next, use the jack to lift the rear of the vehicle and secure it with jack stands. This will provide you with ample space to work underneath the car safely.
Step 2: Remove the Stock Exhaust System
Using a socket wrench, locate and remove the bolts that secure the stock exhaust system to the exhaust manifold and the hangers. Be cautious as some exhaust components may be hot if the vehicle was recently driven. If necessary, use a cutting tool to detach any remaining sections of the exhaust.
Step 3: Install the Rotiform Aero Exhaust
Once the stock exhaust is removed, take the Rotiform Aero Exhaust out of the box and lay it out to understand how it fits together. Start by attaching the new exhaust to the exhaust manifold, ensuring that it aligns correctly with the mounting points.
Securing the Exhaust
Secure the exhaust system using the provided bolts. Make sure to tighten them to the manufacturer’s specifications using a torque wrench. This ensures that the exhaust is firmly in place and prevents any leaks.
Attach the Hangers
Next, attach the exhaust hangers to the designated points on the chassis. This step is crucial for minimizing vibrations and ensuring that the exhaust system is stable while driving.
Step 4: Check for Leaks
After installation, start your vehicle and let it idle for a few minutes. Listen carefully for any unusual noises that might indicate a leak. If you hear any hissing or popping sounds, inspect the connections and tighten any loose bolts as necessary.
Step 5: Lower Your Vehicle
Once you are satisfied that there are no leaks, carefully lower your FR-S back to the ground. Remove the jack stands and ensure everything is secure before taking your vehicle for a test drive.
Step 6: Test Drive
Take your FR-S for a test drive to experience the enhanced performance and sound of your new Rotiform Aero Exhaust. Pay attention to how the car responds during acceleration and whether you notice any improvement in power delivery.
Conclusion
Installing a Rotiform Aero Exhaust on your FR-S is a great way to enhance its performance and sound. By following these steps, you can ensure a successful installation and enjoy the benefits of improved horsepower and torque. With an investment of around $800, this upgrade is well worth it for any FR-S enthusiast looking to boost their driving experience.