Table of Contents
The RSX Type S is a popular choice among car enthusiasts, particularly for those looking to enhance performance and sound. One of the most effective upgrades you can make is installing a Spoon Sports Exhaust. This guide will walk you through the step-by-step process of installation and highlight the performance gains you can expect.
Tools and Materials Needed
- Spoon Sports Exhaust System
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Cutting tool (if necessary)
Before you begin, ensure you have all the necessary tools and materials ready. This will make the installation process smoother and more efficient.
Safety Precautions
Safety should always be your top priority when working on your vehicle. Follow these precautions:
- Wear safety glasses and gloves to protect yourself.
- Work in a well-ventilated area to avoid inhaling exhaust fumes.
- Ensure the car is securely lifted and supported by jack stands.
Step 1: Prepare Your Vehicle
Begin by parking your RSX Type S on a flat surface. Engage the parking brake and ensure the engine is off and cool. Use the jack to lift the rear of the car and secure it with jack stands.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system under the vehicle. Use your socket set to remove the bolts securing the exhaust to the exhaust manifold and the hangers holding it in place.
If the exhaust is rusted or stuck, you may need to use a cutting tool to remove it. Be cautious and ensure that you do not damage any surrounding components.
Step 3: Install the Spoon Sports Exhaust
Once the stock exhaust is removed, take the Spoon Sports Exhaust out of its packaging. Align the exhaust with the exhaust manifold and hangers, ensuring a proper fit.
Secure the exhaust in place by tightening the bolts with your socket set. Make sure all connections are snug but avoid over-tightening to prevent damage.
Step 4: Check for Leaks
Before lowering the vehicle, it’s essential to check for any exhaust leaks. Start the engine and listen closely around the joints of the exhaust system. If you hear any hissing or see any smoke, you may need to tighten the connections further.
Step 5: Lower the Vehicle
Once you have confirmed that there are no leaks, carefully lower your RSX Type S back to the ground. Remove the jack stands and ensure everything is secure.
Performance Gains
Installing a Spoon Sports Exhaust can lead to several performance enhancements, including:
- Improved horsepower and torque due to better exhaust flow.
- Enhanced engine sound, providing a sportier tone.
- Weight reduction compared to the stock exhaust system.
- Potential improvements in fuel efficiency due to optimized performance.
Conclusion
Upgrading to a Spoon Sports Exhaust on your RSX Type S is a straightforward process that can yield significant performance benefits. By following this step-by-step guide, you can enhance your vehicle’s performance and enjoy a more exhilarating driving experience.