Table of Contents
Installing a supercharger kit on your Scion FR-S can significantly enhance its performance. This guide will walk you through the process step-by-step, along with what performance gains you can expect.
What You Need Before You Start
Before diving into the installation process, ensure you have the necessary tools and parts. The following list outlines what you will need:
- Supercharger kit specific to Scion FR-S
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- Safety goggles and gloves
- Owner’s manual for reference
Step-by-Step Installation Process
Step 1: Prepare Your Vehicle
Start by parking your Scion FR-S on a level surface and disconnecting the battery. This ensures safety while you work on the electrical components of the vehicle.
Step 2: Remove the Stock Intake System
Next, you will need to remove the stock intake system. This typically involves:
- Removing the air filter and intake tubing
- Disconnecting any sensors attached to the intake
- Setting aside the components for later use
Step 3: Install the Supercharger Bracket
Once the stock intake is removed, the next step is to install the supercharger bracket. Follow these instructions:
- Align the bracket with the engine mounting points
- Secure it using the provided bolts
- Torque the bolts to the manufacturer specifications
Step 4: Mount the Supercharger
After the bracket is secured, it’s time to mount the supercharger itself:
- Carefully position the supercharger onto the bracket
- Secure it with the provided hardware
- Ensure all connections are tight and leak-free
Step 5: Reinstall the Intake System
With the supercharger in place, you can now reinstall the intake system:
- Attach the new intake tubing that comes with the supercharger kit
- Reconnect any sensors that were previously disconnected
- Ensure the air filter is properly secured
Step 6: Connect the Electrical Components
Next, connect any electrical components that are part of the supercharger kit:
- Follow the wiring diagram provided in the kit
- Secure all connections to prevent any electrical issues
- Double-check for proper placement of wires away from moving parts
Step 7: Reconnect the Battery and Test
Once everything is installed, reconnect the battery:
- Turn on the ignition and check for any warning lights
- Start the engine and listen for any unusual noises
- Allow the engine to reach operating temperature
Performance Expectations
After successfully installing the supercharger, you can expect significant performance improvements:
- Increased horsepower and torque
- Improved throttle response
- Enhanced driving experience and acceleration
Conclusion
Installing a supercharger kit on your Scion FR-S is a rewarding project that can greatly enhance your vehicle’s performance. By following this step-by-step guide, you can successfully complete the installation and enjoy the benefits of increased power and responsiveness.