Table of Contents
The Honda S2000 AP1 is a revered sports car, known for its high-revving engine and agile handling. One of the most effective modifications to enhance its performance is the installation of a Toda Camshaft Kit. This article will guide you through the process of installing a Toda Camshaft Kit on the S2000 AP1, detailing the power gains you can expect and the associated costs.
Understanding the Toda Camshaft Kit
The Toda Camshaft Kit is designed to improve the airflow in the engine, allowing for better combustion and increased power output. It includes high-performance camshafts that optimize the timing and lift of the valves.
Tools and Materials Needed
- Socket set
- Torque wrench
- Camshaft timing tool
- Gasket scraper
- New gaskets
- Engine oil
- Toda Camshaft Kit
Step-by-Step Installation Process
Step 1: Preparation
Before starting the installation, ensure the engine is cool. Disconnect the battery and remove any engine covers to access the camshaft area.
Step 2: Remove the Old Camshafts
Using the socket set, remove the bolts securing the valve cover. Carefully lift the cover off and set it aside. Next, remove the timing belt or chain as per the manufacturer’s instructions.
Once the timing mechanism is removed, you can access the camshafts. Mark the position of the old camshafts for reference. Remove the camshaft caps and lift the old camshafts out of their positions.
Step 3: Install the Toda Camshafts
Carefully place the new Toda camshafts into their respective positions. Ensure they are aligned correctly with the timing marks. Replace the camshaft caps and torque them to the manufacturer’s specifications.
Step 4: Reassemble the Timing Mechanism
Reinstall the timing belt or chain, ensuring it is tensioned correctly. Replace the valve cover with a new gasket to prevent oil leaks. Torque the valve cover bolts to the specified settings.
Step 5: Final Checks and Reconnect Battery
Double-check all connections and ensure everything is secure. Reconnect the battery and start the engine, allowing it to idle for a few minutes. Listen for any unusual noises and check for oil leaks.
Power Gains from the Toda Camshaft Kit
The installation of the Toda Camshaft Kit can yield significant power gains. On average, users report an increase of 15-25 horsepower, depending on supporting modifications and tuning. The improved airflow leads to better throttle response and an overall more engaging driving experience.
Cost Breakdown
When considering the installation of the Toda Camshaft Kit, it’s essential to factor in both parts and labor costs:
- Toda Camshaft Kit: $800 – $1200
- Labor (if not DIY): $300 – $600
- Additional parts (gaskets, oil): $100 – $200
In total, you can expect to spend between $1200 and $2000, depending on whether you perform the installation yourself or hire a professional.
Conclusion
Installing a Toda Camshaft Kit on your S2000 AP1 is a rewarding modification that can significantly enhance performance. With the right tools and a bit of patience, you can achieve impressive power gains that elevate your driving experience.