Table of Contents
The S62 engine, known for its power and performance, can be further enhanced by upgrading to a Tubi exhaust system. This modification not only improves the sound but also increases horsepower by approximately 15 HP. In this article, we will explore the benefits of installing a Tubi exhaust on the S62 and provide a step-by-step guide for the installation process.
Benefits of a Tubi Exhaust
Upgrading to a Tubi exhaust system offers several advantages for S62 owners. Here are some key benefits:
- Improved Sound: The Tubi exhaust provides a deeper, more aggressive sound that enhances the driving experience.
- Performance Increase: The exhaust system is designed to reduce back pressure, resulting in a performance boost of about 15 HP.
- Lightweight Design: Tubi exhausts are often lighter than factory systems, contributing to better overall vehicle dynamics.
- Quality Construction: Made from high-quality materials, Tubi exhausts are built to last and resist corrosion.
Tools Required for Installation
Before starting the installation process, gather the necessary tools to ensure a smooth experience. Here’s what you’ll need:
- Socket set
- Wrench set
- Jack and jack stands
- Safety goggles
- Gloves
- Exhaust hanger removal tool
Step-by-Step Installation Guide
Follow these steps to install the Tubi exhaust on your S62:
Step 1: Prepare the Vehicle
Start by parking the vehicle on a flat surface and engaging the parking brake. Use a jack to lift the rear of the car and secure it with jack stands for safety.
Step 2: Remove the Stock Exhaust
Using the socket and wrench set, remove the bolts securing the stock exhaust system to the headers. Carefully disconnect the exhaust hangers with the removal tool. Make sure to support the exhaust as you remove it to prevent any damage.
Step 3: Install the Tubi Exhaust
Align the Tubi exhaust with the mounting points and hangers. Secure the exhaust to the headers using the provided bolts. Ensure all connections are tight but be cautious not to overtighten.
Step 4: Check for Leaks
Start the engine and let it idle. Listen for any unusual sounds or leaks around the exhaust connections. If you notice any issues, recheck the fittings and tighten as necessary.
Step 5: Lower the Vehicle
Once you are satisfied with the installation, carefully lower the vehicle back to the ground. Remove the jack stands and ensure everything is secure.
Conclusion
Installing a Tubi exhaust on the S62 is a rewarding upgrade that enhances both sound and performance. With a straightforward installation process and noticeable improvements, this modification is a great choice for enthusiasts looking to get more from their engines. Enjoy the new sound and the added horsepower!