Table of Contents
Installing a Velos Stage 3 Supercharger on a W205 C63 can significantly enhance the vehicle’s performance. This guide provides a comprehensive step-by-step process along with cost insights to help you through the installation.
Tools and Materials Needed
- Velos Stage 3 Supercharger Kit
- Socket Wrench Set
- Screwdrivers (Flathead and Phillips)
- Torque Wrench
- Ratchet Extensions
- Coolant
- Oil
- Gasket Sealant
- Shop Towels
Preparation Steps
Before starting the installation, ensure that the vehicle is parked on a level surface and the engine is cool. Gather all tools and materials to avoid interruptions during the process.
Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation.
Remove the Engine Cover
Carefully remove the engine cover by unscrewing the bolts that hold it in place. Set it aside in a safe location.
Removing the Stock Supercharger
To install the Velos Stage 3 Supercharger, you first need to remove the stock supercharger. Follow these steps:
Drain the Coolant
Locate the coolant drain valve and drain the coolant into a suitable container. This step is crucial to avoid spills when removing the supercharger.
Disconnect the Intake and Exhaust Hoses
Carefully disconnect the intake and exhaust hoses connected to the stock supercharger. Make sure to label them for easier reinstallation.
Remove the Stock Supercharger
Using the socket wrench, remove the bolts securing the stock supercharger. Lift it off carefully and set it aside.
Installing the Velos Stage 3 Supercharger
With the stock supercharger removed, you can now install the Velos Stage 3 Supercharger. Follow these steps:
Prepare the New Supercharger
Unbox the Velos Stage 3 Supercharger and ensure all components are present. Inspect for any damages before installation.
Install the Supercharger
Position the Velos supercharger in place and secure it using the bolts removed earlier. Use the torque wrench to tighten the bolts to the manufacturer’s specifications.
Reconnect the Intake and Exhaust Hoses
Reconnect the intake and exhaust hoses to the new supercharger. Ensure they are secure and properly aligned.
Refill the Coolant
Refill the coolant system with the appropriate coolant mixture. Check for any leaks before proceeding.
Final Steps
After the installation is complete, follow these final steps:
Reconnect the Battery
Reconnect the negative terminal of the battery and ensure it is secure.
Start the Engine
Start the engine and allow it to idle. Listen for any unusual noises that may indicate an issue.
Test Drive
Take the vehicle for a test drive to ensure the supercharger is functioning correctly. Monitor the performance and check for any warning lights on the dashboard.
Cost Insights
The cost of installing a Velos Stage 3 Supercharger can vary based on several factors:
- Supercharger Kit: $7,000 – $10,000
- Labor Costs: $1,500 – $2,500
- Additional Parts and Fluids: $500 – $1,000
Overall, the total cost can range from $9,000 to $13,500, depending on the specific requirements and labor rates in your area.
Conclusion
Installing a Velos Stage 3 Supercharger on a W205 C63 is a detailed process that can greatly enhance your vehicle’s performance. By following these steps and being aware of the costs involved, you can successfully complete the installation and enjoy the benefits of increased power.