Table of Contents
The 718 Cayman is a remarkable sports car, and enhancing its performance and aesthetics can elevate your driving experience. One popular upgrade among enthusiasts is the installation of a Vorsteiner carbon fiber exhaust. This article will guide you through the step-by-step process of installing this high-quality exhaust system.
What You Will Need
- Vorsteiner Carbon Fiber Exhaust Kit
- Socket wrench set
- Torque wrench
- Screwdriver set
- Jack and jack stands
- Protective gloves
- Safety glasses
Before starting the installation, ensure you have all the necessary tools and equipment. A clean workspace is also essential to keep track of parts and tools during the process.
Preparation
Begin by parking your 718 Cayman on a flat surface. Engage the parking brake and ensure the engine is cool. This is crucial for safety and to avoid burns during the installation.
Next, use the jack to lift the rear of the vehicle and secure it with jack stands. This will give you ample space to work on the exhaust system.
Removing the Stock Exhaust
To remove the stock exhaust, start by locating the exhaust hangers. Use the screwdriver to detach the hangers from their mounting points. Be careful as the exhaust can be heavy.
Next, use the socket wrench to remove the bolts securing the exhaust to the exhaust manifolds. Make sure to keep these bolts, as you will need them for the new installation.
Once the bolts are removed, carefully lower the exhaust system and remove it from the vehicle. This step may require assistance due to the weight of the exhaust.
Installing the Vorsteiner Carbon Fiber Exhaust
With the stock exhaust removed, it’s time to install the Vorsteiner carbon fiber exhaust. Begin by positioning the new exhaust in place, aligning it with the exhaust manifolds.
Secure the exhaust using the original bolts. Make sure to tighten them to the manufacturer’s specifications using a torque wrench. This ensures a proper seal and prevents exhaust leaks.
Next, reattach the exhaust hangers. Ensure they are secured firmly to prevent any movement of the exhaust system while driving.
Final Checks
Once the exhaust is installed, take a moment to double-check all connections and fittings. Make sure everything is tight and secure before lowering the vehicle back to the ground.
After lowering the car, start the engine and listen for any unusual sounds. A properly installed exhaust should have a deep, throaty sound without any rattles or leaks.
Benefits of the Vorsteiner Carbon Fiber Exhaust
- Improved performance due to reduced weight
- Enhanced exhaust note for a sportier sound
- Stylish carbon fiber finish that complements the 718 Cayman
- Increased durability and resistance to corrosion
The Vorsteiner carbon fiber exhaust not only enhances the performance of your 718 Cayman but also adds a unique aesthetic appeal that sets your vehicle apart from the rest.
Conclusion
Installing a Vorsteiner carbon fiber exhaust on your 718 Cayman is a rewarding project that can significantly improve your car’s performance and sound. Following these steps will ensure a successful installation, allowing you to enjoy the full benefits of this upgrade.
Always remember to consult the manufacturer’s guidelines and consider seeking professional assistance if you are unsure about any step in the installation process.