Installing an Eisenmann M3 Exhaust System: Step-by-step Guide to That Signature Roar

by

The sound of a BMW M3 is iconic, and one of the best ways to enhance that signature roar is by installing an Eisenmann exhaust system. This step-by-step guide will walk you through the process of installing your new exhaust system, ensuring you achieve the performance and sound you’ve been craving.

Tools and Materials Needed

  • Socket wrench set
  • Torque wrench
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Eisenmann M3 Exhaust System
  • Replacement gaskets

Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.

Preparation Steps

Preparation is key to a successful exhaust installation. Follow these steps to get ready:

  • Park your BMW M3 on a flat surface.
  • Engage the parking brake for safety.
  • Gather all tools and materials.
  • Put on safety goggles and gloves.
  • Start the engine for a few minutes to warm up the exhaust system; this makes it easier to remove.

Removing the Stock Exhaust System

Now that you are prepared, it’s time to remove the stock exhaust system. Follow these steps:

  • Use the jack to lift the rear of the car and secure it with jack stands.
  • Locate the exhaust hangers and remove them using a socket wrench.
  • Disconnect the exhaust from the catalytic converters by loosening the bolts.
  • Carefully slide the stock exhaust system out from under the car.

Installing the Eisenmann Exhaust System

With the stock exhaust removed, you can now install the Eisenmann exhaust system. Follow these steps:

  • Position the Eisenmann exhaust system under the car.
  • Align the exhaust with the catalytic converters and slide it into place.
  • Secure the exhaust using the replacement gaskets and bolts, tightening them with a torque wrench.
  • Reattach the exhaust hangers to secure the exhaust system in place.

Final Checks and Testing

After installation, it’s crucial to perform some final checks:

  • Ensure all bolts are tightened to the manufacturer’s specifications.
  • Check that the exhaust hangers are secure and not sagging.
  • Lower the car from the jack stands.
  • Start the engine and listen for any unusual sounds or leaks.

Enjoying Your New Exhaust Sound

Once you’ve completed the installation and confirmed everything is in order, it’s time to enjoy the new sound of your BMW M3. Take it for a test drive to experience the enhanced performance and that unmistakable Eisenmann roar.

Maintenance Tips

To keep your Eisenmann exhaust system in top condition, consider these maintenance tips:

  • Regularly check for any signs of rust or damage.
  • Inspect exhaust hangers for wear and replace if necessary.
  • Clean the exhaust tips to maintain their shine.
  • Consider periodic professional inspections for optimal performance.

By following this guide, you can successfully install an Eisenmann M3 exhaust system and enjoy the thrilling sound and performance it offers. Happy driving!