Table of Contents
Installing an Exedy Racing Clutch in a 700 HP Nissan GT-R can significantly enhance performance and provide a more engaging driving experience. This guide will walk you through the necessary steps and offer tips to ensure a successful installation.
Tools and Materials Needed
- Exedy Racing Clutch Kit
- Transmission jack
- Torque wrench
- Socket and ratchet set
- Flywheel locking tool
- Clutch alignment tool
- Shop manual for Nissan GT-R
- Safety goggles and gloves
Preparation Steps
Before starting the installation, ensure your workspace is clean and organized. Gather all tools and materials to avoid any interruptions during the process.
1. Disconnect the Battery
Safety is paramount. Begin by disconnecting the negative terminal of the battery to prevent any electrical issues while working on the vehicle.
2. Lift the Vehicle
Use a hydraulic lift or jack stands to elevate the Nissan GT-R. Ensure the vehicle is secure before proceeding.
Removing the Old Clutch
Once the vehicle is prepared, you can begin the process of removing the old clutch. Follow these steps carefully.
1. Remove the Transmission
Start by unbolting the transmission from the engine. Use the socket set to remove all bolts, and carefully lower the transmission using the transmission jack.
2. Take Out the Old Clutch
With the transmission removed, you will have access to the old clutch and flywheel. Remove the pressure plate bolts and then take off the clutch disc.
3. Inspect the Flywheel
Inspect the flywheel for any signs of damage or wear. If necessary, resurface or replace it before installing the new clutch.
Installing the Exedy Racing Clutch
With the old clutch removed, it’s time to install the Exedy Racing Clutch. Follow these steps for a proper installation.
1. Position the New Clutch Disc
Use the clutch alignment tool to correctly position the new clutch disc on the flywheel. This ensures proper engagement when the transmission is reattached.
2. Install the Pressure Plate
Align the pressure plate over the clutch disc and secure it with the bolts. Tighten the bolts in a crisscross pattern to ensure even pressure.
3. Reattach the Transmission
Carefully lift the transmission back into place and bolt it to the engine. Make sure all connections are secure.
Final Steps
After the installation is complete, there are a few final steps to ensure everything is in order.
1. Reconnect the Battery
Once everything is reassembled, reconnect the negative terminal of the battery.
2. Test the Clutch
Before taking the vehicle for a drive, test the clutch engagement. Press the clutch pedal to ensure it operates smoothly.
3. Take a Test Drive
Finally, take the Nissan GT-R for a test drive. Pay attention to the clutch’s performance and make sure there are no unusual noises or issues.
Tips for a Successful Installation
- Follow the manufacturer’s instructions carefully.
- Use a torque wrench to ensure proper bolt tightness.
- Have a friend assist with heavy lifting, especially when handling the transmission.
- Double-check all connections before starting the vehicle.
By following this step-by-step guide, you can successfully install an Exedy Racing Clutch in your 700 HP Nissan GT-R. Enjoy the improved performance and driving experience!