Table of Contents
Installing a JWT Popcharger intake on your Infiniti Q60 can significantly enhance the vehicle’s performance. This step-by-step guide will walk you through the installation process, ensuring you achieve the best results.
Tools and Materials Needed
- JWT Popcharger Intake Kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Rubber gloves
- Safety glasses
Before you begin, ensure you have all the necessary tools and materials at hand. This will make the installation process smoother and more efficient.
Preparation Steps
Start by preparing your workspace. Make sure your vehicle is parked on a flat surface, and the engine is cool to the touch. Wearing rubber gloves and safety glasses is recommended for protection.
Disconnect the Battery
To ensure safety during the installation, disconnect the negative terminal of the battery. This prevents any electrical shorts or shocks while working on the intake system.
Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Once the bolts are removed, gently lift the cover off and set it aside.
Removing the Stock Intake
With the engine cover removed, you can now access the stock intake system. Follow these steps to remove it safely.
Disconnect the Air Intake Hose
Locate the air intake hose connected to the throttle body. Use a flathead screwdriver to loosen the clamp, then carefully pull the hose away from the throttle body.
Remove the Stock Airbox
Next, detach the stock airbox from its mounting points. This usually involves removing a few bolts or clips. Once free, lift the airbox out of the engine bay.
Installing the JWT Popcharger Intake
Now that the stock intake is out, it’s time to install the JWT Popcharger intake. Follow these steps carefully.
Position the New Intake
Take the JWT Popcharger intake and position it in the same location as the stock airbox. Ensure that all mounting points align properly.
Secure the Intake
Using the bolts provided in the kit, secure the intake to the mounting points. Make sure to tighten them to the manufacturer’s specifications using a torque wrench.
Reconnect the Air Intake Hose
Reconnect the air intake hose to the throttle body. Ensure that the hose is seated properly and tighten the clamp securely.
Final Steps
With the new intake installed, it’s time to put everything back together and test the system.
Reinstall the Engine Cover
Carefully place the engine cover back on and secure it with the bolts you removed earlier. Ensure it is fitted snugly to avoid any rattling or movement.
Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is tight and secure before proceeding.
Testing the Installation
Start the engine and let it idle for a few minutes. Listen for any unusual sounds that may indicate a problem. Once you’re satisfied, take the car for a test drive to experience the performance boost.
Conclusion
Installing a JWT Popcharger intake on your Infiniti Q60 is a straightforward process that can lead to significant performance improvements. By following these steps, you can enhance your vehicle’s responsiveness and power, making your driving experience more enjoyable.