Table of Contents
Installing a Borla S-type axle-back exhaust system can greatly enhance your vehicle’s performance and sound. This step-by-step guide will walk you through the installation process to ensure a perfect fit.
Tools and Materials Needed
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Borla S-type axle-back exhaust system
- Rubber mallet (optional)
Before starting the installation, gather all the necessary tools and materials. This will help streamline the process and ensure you don’t have to stop midway to find something.
Preparation
Begin by preparing your vehicle for the installation. Make sure to park it on a flat surface and engage the parking brake.
Use the jack to lift the rear of the vehicle and secure it with jack stands. Always prioritize safety when working underneath your vehicle.
Removing the Stock Exhaust
Locate the stock exhaust system and identify the hangers and clamps that hold it in place. Use your socket set to remove any bolts or clamps securing the exhaust.
Once the bolts are removed, gently pull the exhaust away from the hangers. You may need to use a rubber mallet to free stubborn hangers.
Carefully lower the stock exhaust system and set it aside. Make sure to keep all removed hardware for potential reuse.
Installing the Borla S-Type Axle-Back
Take the Borla S-type axle-back exhaust system out of the box and inspect all components to ensure nothing is damaged.
Begin the installation by attaching the new exhaust pipes to the factory connection points. Align the pipes with the hangers and ensure a snug fit.
Using the hardware provided, secure the new exhaust system in place. Make sure to tighten all bolts and clamps to the manufacturer’s specifications.
Adjusting the Exhaust Position
Once the exhaust is installed, check its alignment. The tips should be centered in the rear bumper cutouts. If needed, adjust the position by loosening the clamps and repositioning the exhaust.
After achieving the desired position, retighten all clamps and bolts to ensure everything is secure.
Final Checks
Before lowering the vehicle, double-check all connections and ensure that there are no leaks. Start the engine and listen for any unusual sounds that may indicate a problem.
If everything sounds good, proceed to lower the vehicle back to the ground.
Conclusion
Congratulations! You have successfully installed the Borla S-type axle-back exhaust system. Enjoy the enhanced performance and sound that comes with your new exhaust.
Always remember to follow proper maintenance and check your exhaust system periodically to ensure it remains in good condition.