Table of Contents
The Audi RS6 4.0TT is a powerful vehicle that offers an exhilarating driving experience. However, many enthusiasts seek to unlock even more performance from their cars. One popular method is by installing the Cobb Tuning Accessport, which can lead to significant horsepower gains. This guide will walk you through the step-by-step process of installing the Accessport on your RS6, helping you achieve up to 80 horsepower gains.
What You Will Need
- Cobb Tuning Accessport for Audi RS6 4.0TT
- OBD-II connector
- USB cable for computer connection
- Computer with internet access
- Basic tools (if needed for vehicle access)
Step 1: Preparation
Before you begin the installation process, ensure that your vehicle is parked on a flat surface and that the engine is turned off. This will help prevent any potential electrical issues during the installation.
Step 2: Downloading the Software
The first step in the installation process is to download the necessary software for the Cobb Accessport. Visit the Cobb Tuning website and create an account if you don’t already have one. Once logged in, navigate to the downloads section and select the appropriate software for your Accessport model.
Step 3: Connecting the Accessport
Using the provided OBD-II connector, plug the Accessport into your vehicle’s OBD-II port. This port is typically located under the dashboard near the driver’s seat. Ensure that the connection is secure before proceeding.
Step 4: Powering Up the Accessport
Once the Accessport is connected, turn on the vehicle’s ignition without starting the engine. This will power up the Accessport and allow it to communicate with your vehicle’s ECU.
Step 5: Installing the Tune
With the Accessport powered, follow the on-screen prompts to navigate to the tuning options. Select the appropriate tune for your Audi RS6 4.0TT. Cobb offers various tunes tailored for different performance needs. Review the options and choose the one that best suits your driving style.
Step 6: Confirming Installation
After selecting the tune, the Accessport will begin the installation process. This may take several minutes. Ensure that the vehicle remains powered during this time. Once the installation is complete, the Accessport will prompt you to confirm that the tune has been successfully applied.
Step 7: Finalizing the Setup
Once the tune is installed, you will have the option to adjust various settings, such as boost levels and fuel maps. Take your time to customize these settings according to your preferences. After making any adjustments, save the changes before exiting the Accessport interface.
Step 8: Testing Your Vehicle
With the Accessport successfully installed and configured, it’s time to take your RS6 for a test drive. Find a safe location to evaluate the vehicle’s performance. Pay attention to the throttle response, power delivery, and overall driving experience. You should notice a significant improvement in horsepower and torque.
Step 9: Monitoring Performance
The Cobb Accessport also offers real-time monitoring features. Utilize these to keep an eye on engine parameters such as boost, air-fuel ratio, and temperature. Regular monitoring can help you ensure that your vehicle is performing optimally.
Conclusion
Installing the Cobb Tuning Accessport on your Audi RS6 4.0TT is a straightforward process that can lead to impressive performance gains. By following this step-by-step guide, you can enjoy an enhanced driving experience with up to 80 additional horsepower. Remember to monitor your vehicle’s performance and make adjustments as needed to keep your RS6 running at its best.