Installing Edelbrock Performer Rpm 396 Cam: a Complete Step-by-step Guide

by

Installing the Edelbrock Performer RPM 396 Cam can significantly enhance the performance of your engine. This guide will walk you through the entire process step-by-step, ensuring you have all the information you need to complete the installation successfully.

Tools and Materials Needed

  • Edelbrock Performer RPM 396 Camshaft
  • Camshaft installation tool
  • Torque wrench
  • Socket set
  • Engine oil
  • Gasket set
  • Timing chain and gear set
  • Clean rags
  • Safety glasses
  • Mechanic’s gloves

Preparation Steps

Before starting the installation, it’s essential to prepare your workspace and engine. Follow these steps:

  • Ensure the engine is cool and the vehicle is parked on a level surface.
  • Disconnect the battery to prevent any electrical issues.
  • Remove any necessary components, such as the intake manifold and valve covers, to access the camshaft.
  • Clean the engine surfaces thoroughly to prevent debris from entering the engine.

Removing the Old Camshaft

With the preparation complete, you can now remove the old camshaft. Follow these steps:

  • Remove the timing chain cover and timing chain.
  • Unbolt the old camshaft using the socket set.
  • Carefully slide the camshaft out of the engine, taking care not to damage any components.

Installing the Edelbrock Performer RPM 396 Cam

Now that the old camshaft is removed, you can install the new Edelbrock Performer RPM 396 Cam. Follow these steps:

  • Apply a thin layer of engine oil to the new camshaft to ensure proper lubrication.
  • Carefully guide the new camshaft into the engine, making sure it aligns with the timing gears.
  • Secure the camshaft in place using the correct torque settings specified in the Edelbrock manual.
  • Reinstall the timing chain and cover, ensuring everything is aligned correctly.

Reassembling the Engine

With the new camshaft installed, it’s time to reassemble the engine. Follow these steps:

  • Reinstall the valve covers and intake manifold, ensuring to use new gaskets to prevent leaks.
  • Reconnect any hoses or electrical connections that were removed.
  • Double-check all bolts and connections for proper tightness.

Final Checks and Testing

Before starting the engine, it’s crucial to perform some final checks:

  • Ensure all tools and materials are removed from the engine bay.
  • Reconnect the battery.
  • Check oil levels and top off if necessary.
  • Start the engine and allow it to idle, checking for any unusual noises or leaks.

Conclusion

Installing the Edelbrock Performer RPM 396 Cam can greatly improve your engine’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded camshaft.