Installing Edelbrock Rpm Intake on Your 1967 Barracuda: a Step-by-step Performance Upgrade Guide

by

Upgrading your 1967 Barracuda with an Edelbrock RPM intake manifold can significantly enhance its performance. This guide will walk you through the installation process step-by-step, ensuring you achieve the best results for your classic muscle car.

Tools and Materials Needed

  • Edelbrock RPM intake manifold
  • Gasket set
  • Torque wrench
  • Socket set
  • Ratchet
  • Screwdrivers
  • Engine oil
  • Clean rags
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, it’s essential to prepare your workspace and the vehicle. Follow these steps:

  • Ensure the engine is cool to the touch.
  • Disconnect the battery to prevent any electrical issues.
  • Remove any components that obstruct access to the intake manifold.

Removing the Old Intake Manifold

To install the new Edelbrock RPM intake, you must first remove the old manifold. Here’s how:

  • Remove the air cleaner and carburetor.
  • Disconnect any vacuum lines and electrical connectors.
  • Unbolt the old intake manifold using the socket set.
  • Carefully lift the old manifold off the engine.
  • Clean the engine surface to remove old gasket material.

Installing the Edelbrock RPM Intake

Now that the old manifold is removed, you can proceed with the installation of the Edelbrock RPM intake:

  • Place the new gasket on the engine block.
  • Position the Edelbrock RPM intake manifold onto the gasket.
  • Align the manifold with the bolt holes.
  • Hand-tighten the bolts to hold the manifold in place.

Torque Specifications

Once the manifold is positioned correctly, use a torque wrench to tighten the bolts to the manufacturer’s specifications:

  • Tighten the bolts in a crisscross pattern.
  • Follow the recommended torque settings for the Edelbrock RPM intake.

Reconnecting Components

After the intake manifold is securely installed, it’s time to reconnect all the components:

  • Reinstall the carburetor and air cleaner.
  • Reconnect vacuum lines and electrical connectors.
  • Double-check all connections for security.

Final Steps

With everything reconnected, there are a few final checks before starting your engine:

  • Reconnect the battery.
  • Check for any loose tools or parts in the engine bay.
  • Start the engine and let it idle, checking for leaks.

Conclusion

Installing an Edelbrock RPM intake manifold on your 1967 Barracuda is a rewarding project that can enhance your vehicle’s performance. With careful preparation and attention to detail, you can successfully complete this upgrade and enjoy the benefits of improved power and efficiency.