Installing Eibach Pro-kit Springs on Your Miata: Benefits and Instructions

by

Upgrading your Mazda Miata’s suspension can significantly improve its handling and performance. One popular option among enthusiasts is the Eibach Pro-Kit Springs. In this article, we will explore the benefits of installing Eibach Pro-Kit Springs on your Miata and provide a step-by-step guide on how to do it.

Benefits of Eibach Pro-Kit Springs

Eibach Pro-Kit Springs are designed to enhance your vehicle’s performance while maintaining ride quality. Here are some key benefits:

  • Improved Handling: Lowering your Miata’s center of gravity enhances stability and cornering performance.
  • Sporty Appearance: Eibach springs lower the ride height, giving your Miata a more aggressive stance.
  • Better Ride Quality: These springs are engineered to provide a comfortable ride, even on rough roads.
  • Increased Performance: The springs work well with factory shocks, improving overall performance without compromising comfort.

Tools and Materials Needed

Before you begin the installation, make sure you have the following tools and materials:

  • Jack and jack stands
  • Socket set
  • Wrench set
  • Spring compressor
  • Eibach Pro-Kit Springs
  • Torque wrench
  • Safety glasses
  • Gloves

Step-by-Step Installation Instructions

Step 1: Prepare Your Miata

Start by parking your Miata on a flat surface and engaging the parking brake. Loosen the lug nuts on the wheels but do not remove them yet.

Step 2: Lift the Vehicle

Using a jack, lift the front of the car and secure it with jack stands. Repeat this process for the rear of the vehicle.

Step 3: Remove the Wheels

Now, remove the lug nuts and take off the wheels to access the suspension components.

Step 4: Remove the Old Springs

Using your socket and wrench set, remove the bolts securing the struts. Carefully detach the strut from the vehicle. Use a spring compressor to safely compress the old springs before removing them from the strut assembly.

Step 5: Install the Eibach Pro-Kit Springs

Once the old springs are removed, place the Eibach Pro-Kit Springs onto the strut assembly. Ensure they are seated correctly and then decompress the spring compressor carefully to secure the springs in place.

Step 6: Reattach the Struts

Reinstall the struts back onto the vehicle and tighten the bolts to the manufacturer’s specifications using a torque wrench.

Step 7: Repeat for the Rear Suspension

Follow the same steps for the rear suspension. Remove the rear struts, replace the springs with the Eibach Pro-Kit Springs, and reattach the struts.

Step 8: Reinstall the Wheels

After installing the new springs on both the front and rear, reinstall the wheels and hand-tighten the lug nuts.

Step 9: Lower the Vehicle

Carefully lower the vehicle back to the ground using the jack and remove the jack stands. Once the car is on the ground, fully tighten the lug nuts in a criss-cross pattern.

Step 10: Test Drive

Finally, take your Miata for a test drive to ensure everything is functioning correctly. Pay attention to the handling and ride comfort to enjoy the benefits of your new Eibach Pro-Kit Springs.

Conclusion

Installing Eibach Pro-Kit Springs on your Miata is a rewarding upgrade that enhances both performance and aesthetics. With the right tools and a little patience, you can enjoy improved handling and a sportier look for your beloved vehicle.