Installing Eibach Wheel Spacers: Step-by-step Guide for a 10-20% Handling Improvement

by

Installing Eibach wheel spacers can significantly enhance your vehicle’s handling by improving stability and cornering performance. This guide will walk you through the step-by-step process of installing wheel spacers, ensuring that you achieve a 10-20% improvement in handling.

Understanding Wheel Spacers

Wheel spacers are devices that fit between the wheel hub and the wheel itself, pushing the wheel further away from the vehicle. This modification has several benefits:

  • Improved Stability: Wider stance enhances vehicle stability.
  • Better Cornering: Increased grip during turns.
  • Aesthetic Appeal: Gives your vehicle a more aggressive look.

Tools and Materials Needed

Before starting the installation, gather the following tools and materials:

  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Wheel spacers
  • Anti-seize lubricant

Step-by-Step Installation Process

Step 1: Prepare Your Vehicle

Park your vehicle on a flat surface and engage the parking brake. Loosen the lug nuts on the wheels you will be working on, but do not remove them yet.

Step 2: Lift the Vehicle

Using a jack, lift the vehicle and secure it with jack stands. Ensure the vehicle is stable before proceeding.

Step 3: Remove the Wheels

Now, completely remove the loosened lug nuts and take off the wheels. Set them aside in a safe place.

Step 4: Clean the Hub Surface

Clean the hub surface where the wheel spacer will be installed. Remove any dirt, rust, or debris for a proper fit.

Step 5: Install the Wheel Spacers

Place the wheel spacers onto the hub. Ensure they are seated properly and flush against the hub surface.

Step 6: Reinstall the Wheels

Align the wheels with the spacers and carefully place them back onto the vehicle. Hand-tighten the lug nuts to hold the wheels in place.

Step 7: Torque the Lug Nuts

Using a torque wrench, tighten the lug nuts to the manufacturer’s specifications. This ensures that they are secure and safe for driving.

Step 8: Lower the Vehicle

Carefully lower the vehicle back to the ground and remove the jack stands. Ensure everything is stable before driving.

Step 9: Test Drive

Take your vehicle for a test drive to feel the difference in handling. Pay attention to how the vehicle responds during turns and at various speeds.

Safety Considerations

While installing wheel spacers can improve handling, it is essential to keep safety in mind:

  • Always use jack stands when lifting the vehicle.
  • Ensure lug nuts are torqued to specifications.
  • Check for any unusual noises or handling issues after installation.

Conclusion

Installing Eibach wheel spacers is a straightforward process that can yield significant benefits in handling and stability. By following this step-by-step guide, you can enhance your vehicle’s performance while ensuring safety and reliability.