Installing Hks Hyper Max Pro Suspension on the Gr Corolla G16e-gts: Step-by-step Guide & Real-world Results

by

The GR Corolla G16E-GTS is a powerful and agile vehicle, but to truly enhance its performance, upgrading the suspension is crucial. One of the top choices for enthusiasts is the HKS Hyper Max Pro Suspension. This guide will walk you through the installation process step-by-step and share real-world results.

Tools and Materials Needed

  • HKS Hyper Max Pro Suspension Kit
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressor
  • Flathead and Phillips screwdrivers
  • Pliers
  • Safety glasses and gloves

Preparation Steps

Before starting the installation, ensure your workspace is safe and organized. Gather all tools and materials, and park your vehicle on a flat surface. Follow these steps to prepare:

  • Disconnect the battery to prevent electrical issues.
  • Lift the vehicle using a jack and secure it with jack stands.
  • Remove the wheels to access the suspension components.

Removing the Stock Suspension

With the vehicle prepared, begin removing the stock suspension components. Follow these steps carefully:

  • Use a socket set to remove the bolts securing the strut to the hub assembly.
  • Disconnect any brake lines or sensors attached to the strut.
  • Remove the top strut mount bolts from the engine bay.
  • Carefully pull the strut out from the wheel well.
  • Repeat the process for each corner of the vehicle.

Installing the HKS Hyper Max Pro Suspension

Now that the stock suspension is removed, it’s time to install the HKS Hyper Max Pro Suspension. Follow these steps:

  • Using a spring compressor, compress the HKS springs and install them onto the new struts.
  • Secure the top mount with the provided hardware.
  • Insert the new strut assembly into the wheel well, aligning it with the top mount.
  • Reattach the strut to the hub assembly using the original bolts.
  • Reconnect any brake lines or sensors that were disconnected.
  • Repeat for all corners of the vehicle.

Final Adjustments and Torque Specifications

After installing the new suspension, it’s important to make final adjustments and ensure everything is torqued to the manufacturer’s specifications:

  • Check the alignment of the suspension components.
  • Use a torque wrench to tighten all bolts to the specified torque settings:
    • Strut to hub assembly: 80 lb-ft
    • Top strut mount: 40 lb-ft
  • Reinstall the wheels and lower the vehicle back to the ground.

Real-World Results and Performance Testing

After the installation, it’s time to evaluate the performance of the HKS Hyper Max Pro Suspension. Here are some key observations:

  • Improved handling and cornering stability.
  • Better responsiveness on various road surfaces.
  • Increased comfort during daily driving.
  • Enhanced overall driving experience, especially on twisty roads.

Conclusion

Installing the HKS Hyper Max Pro Suspension on the GR Corolla G16E-GTS is a rewarding process that significantly enhances the vehicle’s performance. With the right tools and careful attention to detail, you can achieve excellent results that elevate your driving experience.