Table of Contents
Installing H&R lowering springs on your AMG GT R can significantly enhance its performance and aesthetics. This guide will walk you through the step-by-step process of installation and the performance gains you can expect.
What You Need
Before starting the installation, gather all necessary tools and components. Here’s a list of what you will need:
- H&R Lowering Springs
- Jack and jack stands
- Socket set
- Torque wrench
- Spring compressor
- Flathead screwdriver
- Safety glasses
Preparation
Before you begin the installation, ensure your vehicle is parked on a flat surface. Engage the parking brake and wear safety glasses for protection. Here’s how to prepare:
- Lift the vehicle using a jack and secure it with jack stands.
- Remove the wheels to access the suspension components.
Removing the Stock Springs
To remove the stock springs, follow these steps:
- Locate the top and bottom spring mount bolts.
- Using a socket set, remove the bolts carefully.
- Use a spring compressor to relieve tension on the springs.
- Remove the stock springs from the vehicle.
Installing H&R Lowering Springs
Now that the stock springs are removed, it’s time to install the H&R lowering springs:
- Place the H&R lowering springs into the spring mounts.
- Use the spring compressor to compress the springs for easier installation.
- Reattach the top and bottom bolts securely.
- Ensure all components are tightened to the manufacturer’s specifications.
Reassembling the Vehicle
After installing the lowering springs, reassemble your vehicle:
- Reinstall the wheels and tighten the lug nuts.
- Carefully lower the vehicle back to the ground.
- Check the suspension components for any loose parts.
Performance Gains
Installing H&R lowering springs on your AMG GT R can lead to several performance benefits:
- Improved handling due to lower center of gravity.
- Reduced body roll during cornering.
- Enhanced aesthetic appeal with a sportier stance.
- Better overall driving experience.
Final Checks
Once the installation is complete, perform the following final checks:
- Take the vehicle for a test drive to assess handling.
- Check for any unusual noises or vibrations.
- Re-torque all bolts after a short drive to ensure they remain secure.
Conclusion
Installing H&R lowering springs on your AMG GT R is a manageable task that can yield significant performance improvements. By following this guide, you can enhance your vehicle’s handling and appearance, making your driving experience even more enjoyable.