Installing H&r Lowering Springs on Your B9 S4: Improve Handling and Looks for $300

by

If you’re looking to enhance the handling and aesthetics of your Audi B9 S4, installing H&R lowering springs is a fantastic upgrade. For around $300, you can significantly improve your vehicle’s performance and appearance. This guide will walk you through the installation process step by step.

Why Choose H&R Lowering Springs?

H&R springs are known for their quality and performance. Here are several reasons why they are a popular choice among car enthusiasts:

  • Improved Handling: Lowering your S4 reduces body roll and enhances cornering stability.
  • Enhanced Appearance: A lower stance gives your car a more aggressive look.
  • Quality Construction: H&R springs are made from high-quality materials for durability.
  • Easy Installation: Designed for a straightforward installation process.

What You’ll Need

Before starting the installation, gather the following tools and materials:

  • H&R Lowering Springs
  • Jack and Jack Stands
  • Socket Set
  • Torque Wrench
  • Pry Bar
  • Spring Compressors
  • Safety Glasses
  • Gloves

Step-by-Step Installation Guide

1. Prepare Your Vehicle

Start by parking your B9 S4 on a flat surface. Engage the parking brake and gather all your tools. It’s essential to work in a safe environment.

2. Lift the Vehicle

Using a jack, lift the front of the vehicle and secure it with jack stands. Repeat this process for the rear. Ensure the car is stable before proceeding.

3. Remove the Wheels

Use your socket set to remove the lug nuts and take off the wheels. This gives you access to the suspension components.

4. Remove the Stock Springs

To remove the stock springs, you’ll need to disassemble parts of the suspension:

  • Detach the sway bar links.
  • Remove the strut bolts.
  • Use spring compressors to safely compress the stock springs.
  • Carefully remove the springs from the struts.

5. Install H&R Lowering Springs

With the stock springs removed, it’s time to install the H&R lowering springs:

  • Place the H&R springs onto the struts.
  • Use the spring compressors to ensure the springs are securely in place.
  • Reattach the strut bolts and sway bar links.

6. Reassemble the Suspension

Once the new springs are in place, reassemble the suspension components. Make sure everything is tightened to the manufacturer’s specifications.

7. Reinstall the Wheels

Put the wheels back on and hand-tighten the lug nuts. Once all wheels are on, lower the vehicle off the jack stands.

8. Final Torque Check

After lowering the car, use a torque wrench to ensure all lug nuts are tightened to the correct specification. This step is crucial for safety.

Conclusion

Installing H&R lowering springs on your B9 S4 is an excellent way to enhance both performance and aesthetics. With just a few tools and some time, you can achieve a more aggressive look and improved handling for around $300. Enjoy your newly transformed ride!