Installing H&r Performance Springs on Your E63 Amg: a Complete Step-by-step Guide

by

Upgrading your E63 AMG with H&R Performance Springs can significantly enhance its handling and appearance. This guide will walk you through the installation process step-by-step, ensuring you achieve the best results.

Tools and Materials Needed

  • H&R Performance Springs
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressor
  • Flathead and Phillips screwdrivers
  • Safety glasses
  • Gloves

Preparation Steps

Before you begin the installation, ensure you have a clean workspace and all your tools ready. Follow these preparation steps:

  • Park your E63 AMG on a flat surface.
  • Engage the parking brake.
  • Wear safety glasses and gloves for protection.

Removing the Stock Springs

To install the H&R Performance Springs, you first need to remove the stock springs. Follow these steps:

  • Loosen the lug nuts on the wheels.
  • Use the jack to lift the vehicle and secure it with jack stands.
  • Remove the front wheels to access the suspension components.
  • Disconnect the sway bar links from the struts.
  • Remove the bolts securing the strut assembly to the vehicle.
  • Carefully remove the strut assembly from the vehicle.
  • Use a spring compressor to safely compress the stock springs.
  • Remove the top nut from the strut assembly and take off the spring.

Installing H&R Performance Springs

With the stock springs removed, you can now install the H&R Performance Springs:

  • Place the H&R spring onto the strut assembly.
  • Reattach the top nut to secure the spring in place.
  • Carefully remove the spring compressor.
  • Reinstall the strut assembly into the vehicle.
  • Secure the strut assembly with the bolts removed earlier.
  • Reconnect the sway bar links to the struts.

Reinstalling the Wheels

Once the new springs are installed, it’s time to put everything back together:

  • Reinstall the front wheels and hand-tighten the lug nuts.
  • Lower the vehicle back to the ground.
  • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.

Final Checks and Test Drive

After everything is reassembled, perform the following checks:

  • Ensure all bolts and nuts are securely tightened.
  • Check the alignment of the wheels.
  • Take the car for a test drive to assess the handling and comfort.

Conclusion

Installing H&R Performance Springs on your E63 AMG can greatly improve its performance and aesthetics. By following this step-by-step guide, you can ensure a successful installation and enjoy the enhanced driving experience.