Table of Contents
Upgrading the suspension on your Porsche 911 Turbo can significantly enhance its performance and handling. One popular upgrade is the installation of H&R Springs, known for their quality and ability to improve vehicle dynamics. This guide will walk you through the step-by-step process of installing H&R Springs on your 911 Turbo.
Tools and Materials Needed
- H&R Springs kit
- Jack and jack stands
- Socket set
- Torque wrench
- Spring compressors
- Flathead screwdriver
- Phillips screwdriver
- Safety glasses
- Gloves
Preparation
Before starting the installation, ensure you have all the necessary tools and materials at hand. Safety is paramount, so wear safety glasses and gloves throughout the process. Make sure your vehicle is on a flat surface and the engine is turned off.
Step 1: Lifting the Vehicle
Begin by using a jack to lift the front of the vehicle. Secure it with jack stands to ensure stability. Repeat this process for the rear of the vehicle. Always double-check that the vehicle is secure before proceeding.
Step 2: Removing the Wheels
Once the vehicle is securely lifted, use a socket set to remove the lug nuts on each wheel. Carefully take off the wheels and set them aside. This will give you access to the suspension components.
Step 3: Removing the Old Springs
Using the appropriate tools, start by removing the components that hold the old springs in place. This typically includes the strut assembly. Follow these sub-steps:
- Detach the sway bar links if applicable.
- Remove the bolts securing the strut to the hub assembly.
- Carefully remove the strut assembly from the vehicle.
Once the strut assembly is removed, use spring compressors to compress the old springs. This is crucial for safely removing the springs from the strut.
Step 4: Installing H&R Springs
With the old springs removed, it’s time to install the H&R Springs. Follow these steps:
- Place the H&R Spring onto the strut assembly.
- Use the spring compressors to secure the spring in place.
- Reattach the strut assembly to the vehicle, ensuring all bolts are tightened to the manufacturer’s specifications.
Step 5: Reinstalling the Wheels
After both the front and rear springs have been installed, it’s time to reinstall the wheels. Place each wheel back onto the hub and hand-tighten the lug nuts.
Step 6: Lowering the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the vehicle is on the ground, use a torque wrench to tighten the lug nuts to the specified torque settings.
Step 7: Final Checks and Test Drive
Before taking your 911 Turbo for a test drive, double-check all components to ensure everything is secure. Look for any signs of loose hardware or misalignment. Once you’re satisfied, take the car for a test drive to feel the difference in handling and performance.
Conclusion
Installing H&R Springs on your Porsche 911 Turbo is a fantastic way to enhance performance and handling. By following this step-by-step guide, you can achieve a successful installation and enjoy the improved driving experience that comes with it. Always remember to follow safety procedures and consult a professional if you encounter any difficulties during the installation process.