Table of Contents
The Injen Power Outs Intake system is a popular modification for the Infiniti Q50 equipped with the VR30DDTT engine. This aftermarket intake is designed to enhance performance by increasing horsepower and torque, providing a more exhilarating driving experience. In this article, we will guide you through the installation process and highlight the benefits of this upgrade.
Benefits of Installing Injen Power Outs Intake
Upgrading to the Injen Power Outs Intake offers several advantages for your Q50 VR30DDTT. Here are some key benefits:
- Increased Horsepower: The intake system improves airflow to the engine, resulting in a noticeable increase in horsepower.
- Enhanced Torque: Improved airflow also contributes to better torque delivery, making acceleration more responsive.
- Improved Engine Sound: The intake enhances the engine’s sound, providing a sportier and more aggressive tone.
- Easy Installation: The Injen Power Outs Intake is designed for a straightforward installation process, making it accessible for DIY enthusiasts.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Injen Power Outs Intake kit
- Shop towel or microfiber cloth
- Optional: Air filter cleaner and oil
Step-by-Step Installation Process
Step 1: Prepare the Vehicle
Begin by parking your Q50 on a level surface and turning off the engine. Allow it to cool down completely before proceeding with the installation.
Step 2: Remove the Stock Intake System
To remove the stock intake system, follow these steps:
- Disconnect the negative battery terminal to prevent any electrical issues.
- Locate the air intake box and remove the screws using a socket wrench.
- Carefully disconnect the mass airflow sensor (MAF) connector.
- Remove the air intake duct by loosening the clamps and pulling it off.
- Take out the stock air filter and any additional components as necessary.
Step 3: Install the Injen Power Outs Intake
Once the stock intake is removed, it’s time to install the Injen Power Outs Intake:
- Begin by placing the new Injen air filter into the intake system.
- Attach the intake tube to the throttle body and secure it with the provided clamps.
- Reconnect the MAF sensor to the new intake tube.
- Ensure all connections are tight and secure.
- Reinstall any additional components that were removed during the process.
Step 4: Final Checks
After the installation is complete, perform the following checks:
- Double-check all clamps and connections to ensure they are secure.
- Reconnect the negative battery terminal.
- Start the engine and listen for any unusual sounds.
- Check for any engine warning lights on the dashboard.
Maintenance Tips for Your Injen Power Outs Intake
To keep your Injen Power Outs Intake functioning optimally, follow these maintenance tips:
- Regular Cleaning: Clean the air filter regularly using an appropriate air filter cleaner and oil.
- Inspect Connections: Periodically check all connections and clamps for tightness.
- Monitor Performance: Pay attention to any changes in engine performance or sound, and address any issues promptly.
Conclusion
Installing the Injen Power Outs Intake on your Q50 VR30DDTT is a straightforward process that can lead to significant performance improvements. By following the steps outlined in this guide, you can enhance your vehicle’s horsepower and torque while enjoying a more engaging driving experience. Remember to perform regular maintenance to keep your intake system in top condition and maximize its benefits.