Table of Contents
The Mercedes AMG A45 S is a high-performance vehicle that offers exhilarating speed and agility. One of the best upgrades you can make to enhance its performance and sound is installing a performance exhaust system. This guide will walk you through the step-by-step process of installing a performance exhaust on your A45 S.
Tools and Materials Needed
- Performance exhaust system
- Socket set
- Wrench set
- Jack and jack stands
- Safety goggles
- Gloves
- Torque wrench
- Exhaust hanger tool
Preparation
Before starting the installation, ensure you have all the necessary tools and materials. Make sure your vehicle is parked on a flat surface and the engine is cool. Wear safety goggles and gloves to protect yourself during the process.
Step 1: Lifting the Vehicle
Use a jack to lift the front of the vehicle and secure it with jack stands. Ensure the vehicle is stable before proceeding to the next steps.
Step 2: Removing the Stock Exhaust
Locate the stock exhaust system underneath the vehicle. Use a socket and wrench to remove the bolts securing the exhaust to the exhaust manifold and the rear section.
Carefully detach the exhaust hangers using an exhaust hanger tool. Be cautious as the exhaust may be heavy. Once all connections are loose, remove the entire stock exhaust system from the vehicle.
Step 3: Preparing the New Exhaust
Unbox your new performance exhaust system and lay out all components. Refer to the manufacturer’s instructions to familiarize yourself with the parts and installation sequence.
Step 4: Installing the New Exhaust
Begin by positioning the new exhaust system under the vehicle. Start with the front section and align it with the exhaust manifold. Secure it using the provided bolts, but do not fully tighten them yet.
Next, attach the rear section of the exhaust. Ensure that all hangers are properly aligned and insert them into their respective mounting points. Again, do not fully tighten the bolts at this stage.
Step 5: Finalizing the Installation
Once the entire exhaust system is in place, go back and tighten all bolts using a torque wrench to the specifications provided by the manufacturer. This step is crucial to ensure there are no leaks or issues.
Step 6: Checking for Leaks
Start the engine and let it idle for a few minutes. Listen for any unusual noises and check for exhaust leaks around the joints. If you notice any leaks, you may need to tighten the bolts further.
Step 7: Lowering the Vehicle
Once you are satisfied that there are no leaks, carefully lower the vehicle by removing the jack stands and using the jack to bring it back to the ground.
Step 8: Enjoying Your New Exhaust
Take your Mercedes AMG A45 S for a test drive to enjoy the enhanced sound and performance of your new exhaust system. Remember to monitor the exhaust for any issues in the coming days.
Conclusion
Installing a performance exhaust on your Mercedes AMG A45 S can significantly improve your driving experience. By following this step-by-step guide, you can successfully complete the installation yourself and enjoy the benefits of enhanced performance and sound.