Table of Contents
Installing MSD’s Two-Step Launch Control on a turbocharged Ford Focus can significantly enhance your vehicle’s performance during launches. This guide will walk you through the costs and a step-by-step process to install this system effectively.
Understanding MSD’s Two-Step Launch Control
MSD’s Two-Step Launch Control is designed to help drivers achieve optimal launch RPMs, preventing wheel spin and improving traction. This system is particularly beneficial for turbocharged vehicles, such as the Ford Focus, where power delivery can be aggressive.
Costs Involved in the Installation
The total cost of installing MSD’s Two-Step Launch Control on your Ford Focus can vary based on several factors. Below is a breakdown of potential costs:
- MSD Two-Step Launch Control Kit: $200 – $300
- Wiring Harness: $50 – $100
- Labor Costs (if using a professional): $100 – $200
- Miscellaneous Supplies (connectors, tape, etc.): $20 – $50
Overall, expect to spend between $370 and $650 depending on whether you choose to install it yourself or hire a professional.
Step-by-Step Installation Process
Follow these steps to install the MSD Two-Step Launch Control on your turbocharged Ford Focus:
Step 1: Gather Your Tools and Materials
Before starting, make sure you have the following tools and materials ready:
- MSD Two-Step Launch Control Kit
- Wiring harness
- Socket set
- Screwdrivers
- Wire strippers
- Electrical tape
- Safety goggles
Step 2: Disconnect the Battery
Safety first! Begin by disconnecting the negative terminal of your battery to prevent any electrical shorts during installation.
Step 3: Locate the Ignition Wires
Identify the ignition wires in your Ford Focus. You will need to access the engine bay and find the wires that lead to the ignition coil.
Step 4: Install the MSD Launch Control Unit
Mount the MSD Launch Control unit in a secure location within the engine bay. Use screws or brackets provided in the kit to ensure it is firmly attached.
Step 5: Connect the Wiring Harness
Follow the wiring diagram provided with the MSD kit to connect the wiring harness to the ignition wires. Make sure to connect the appropriate wires to the correct terminals.
Step 6: Set the Desired RPM
Adjust the settings on the MSD unit to set your desired launch RPM. This is typically done using a rotary switch or dip switches on the unit.
Step 7: Reconnect the Battery
Once all connections are made and secured, reconnect the negative terminal of the battery.
Step 8: Test the System
Start your vehicle and test the launch control system. Make sure it functions correctly by performing a controlled launch in a safe environment.
Final Thoughts
Installing MSD’s Two-Step Launch Control on your turbocharged Ford Focus can greatly improve your launch performance. By following the steps outlined in this guide, you can ensure a successful installation and enjoy enhanced driving experiences.