Table of Contents
The Neuspeed P-FLO intake system is a popular modification for the Audi S3 2.0 TFSI, known for its ability to enhance engine performance and sound. In this article, we will go through the step-by-step installation process, discuss the power gains you can expect, and outline the costs associated with this upgrade.
Why Upgrade to Neuspeed P-FLO Intake?
Upgrading to the Neuspeed P-FLO intake offers several benefits:
- Improved Airflow: Increases the amount of air entering the engine, leading to better combustion.
- Enhanced Sound: Provides a more aggressive engine sound, enhancing the driving experience.
- Potential Power Gains: Can result in noticeable horsepower and torque improvements.
- Simplicity of Installation: Designed for a straightforward installation process.
Tools Required for Installation
Before starting the installation, gather the following tools:
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Rubber gloves (optional)
Step-by-Step Installation Guide
Step 1: Preparation
Begin by ensuring your vehicle is parked on a flat surface and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during installation.
Step 2: Remove the Stock Air Intake
Locate the stock air intake system. Use your socket wrench to remove the screws and clamps holding the intake in place. Carefully disconnect any electrical connectors and remove the intake from the engine bay.
Step 3: Install the Neuspeed P-FLO Intake
Take the Neuspeed P-FLO intake and position it in the same location as the stock intake. Secure it using the provided clamps and screws. Make sure all connections are tight and there are no air leaks.
Step 4: Connect the Air Filter
Attach the air filter to the intake tube. Ensure it is securely fastened and properly seated to prevent any debris from entering the engine.
Step 5: Reconnect the Battery
Once everything is installed and secured, reconnect the negative battery terminal. Start the engine and listen for any unusual sounds that may indicate a problem.
Expected Power Gains
After installing the Neuspeed P-FLO intake, you can expect the following power gains:
- Horsepower Increase: Up to 10-15 horsepower depending on other modifications.
- Torque Improvement: A noticeable increase in torque, enhancing acceleration.
- Throttle Response: Improved throttle response for a more engaging driving experience.
Cost Breakdown
The costs associated with the Neuspeed P-FLO intake installation include:
- Neuspeed P-FLO Intake Kit: Approximately $300-$400.
- Installation Costs: If you choose to have it professionally installed, expect to pay around $100-$150.
- Total Estimated Cost: $400-$550 depending on installation choice.
Conclusion
Installing the Neuspeed P-FLO intake on your Audi S3 2.0 TFSI is a worthwhile investment for those looking to enhance performance and driving enjoyment. With a straightforward installation process and significant power gains, this modification can elevate your driving experience.