Installing Power: Polyurethane Bushings on a 300-hp Sedan — Step-by-step Tutorial

by

Upgrading your sedan with polyurethane bushings is an effective way to enhance performance and handling. This tutorial provides a step-by-step guide to installing polyurethane bushings on a 300-hp sedan.

Tools and Materials Needed

  • Polyurethane bushings kit
  • Jack and jack stands
  • Socket set
  • Wrenches
  • Torque wrench
  • Pry bar
  • Grease
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, ensure you have all the necessary tools and materials. Follow these preparation steps:

  • Park your sedan on a flat surface.
  • Engage the parking brake.
  • Put on safety glasses and gloves.

Step 1: Lifting the Vehicle

To access the suspension components, lift the vehicle using a jack and secure it with jack stands. Make sure the car is stable before proceeding.

Step 2: Removing Old Bushings

Locate the old bushings in the suspension components. Use the following steps to remove them:

  • Use a socket set to remove the bolts securing the suspension components.
  • Carefully detach the components from the vehicle.
  • Use a pry bar to remove the old bushings from their mounts.

Step 3: Preparing the New Polyurethane Bushings

Before installation, prepare the new polyurethane bushings:

  • Apply a thin layer of grease to the outside of the bushings.
  • Ensure that the bushings are free of dirt and debris.

Step 4: Installing New Bushings

Follow these steps to install the new polyurethane bushings:

  • Align the new bushings with the mounting holes.
  • Press the bushings into place using a suitable tool, ensuring they fit snugly.
  • Reattach the suspension components using the original bolts.

Step 5: Torque Specifications

After reattaching the suspension components, it’s crucial to follow the correct torque specifications:

  • Refer to your vehicle’s service manual for specific torque settings.
  • Use a torque wrench to tighten the bolts to the specified settings.

Step 6: Lowering the Vehicle

Once everything is tightened and secure, carefully lower the vehicle back to the ground:

  • Remove the jack stands.
  • Lower the vehicle using the jack.

Step 7: Final Inspection

After installation, perform a final inspection to ensure everything is in order:

  • Check that all bolts are tightened correctly.
  • Inspect the bushings for proper alignment.
  • Ensure there are no loose parts in the suspension system.

Conclusion

Installing polyurethane bushings on your 300-hp sedan can significantly improve handling and performance. By following this step-by-step tutorial, you can complete the installation safely and effectively.