Table of Contents
Installing Powerflex Polyurethane Bushings is an excellent way to enhance the performance of your Subaru WRX. This guide will walk you through the step-by-step process of installation, ensuring that you achieve optimal results.
Tools and Materials Required
Before starting the installation, gather all the necessary tools and materials to ensure a smooth process. Here’s what you will need:
- Powerflex Polyurethane Bushings
- Jack and jack stands
- Socket set
- Torque wrench
- Pry bar
- Grease
- Safety goggles
- Gloves
Step 1: Prepare Your Vehicle
Begin by parking your Subaru WRX on a flat surface and engaging the parking brake. Ensure that the engine is turned off and cool before starting the installation process.
Next, use the jack to lift the vehicle and place it securely on jack stands. This will provide you with ample space to work underneath the car.
Step 2: Remove the Existing Bushings
Locate the components where the bushings are installed. This may include the control arms, sway bar, or other suspension parts. Use your socket set to remove the bolts securing these components.
Once the bolts are removed, gently use a pry bar to detach the components from the existing bushings. Be cautious not to damage any surrounding parts during this process.
Step 3: Install Powerflex Polyurethane Bushings
With the old bushings removed, it’s time to install the new Powerflex Polyurethane Bushings. Start by applying a thin layer of grease to the inside of the new bushings. This will facilitate easier installation and enhance performance.
Align the new bushings with the mounting points and press them into place. You may need to use a rubber mallet to ensure they fit snugly.
Step 4: Reattach Suspension Components
Once the new bushings are in place, reattach the suspension components you removed earlier. Ensure that all parts are aligned correctly before securing them with the bolts.
Use a torque wrench to tighten the bolts to the manufacturer’s specifications. This step is crucial to ensure that everything is securely fastened.
Step 5: Lower the Vehicle
After everything is reattached and tightened, carefully lower the vehicle back to the ground. Remove the jack stands and ensure that the car is stable before proceeding.
Step 6: Test Drive
With the installation complete, it’s time to take your Subaru WRX for a test drive. Pay attention to how the vehicle handles and listen for any unusual noises. The new Powerflex Polyurethane Bushings should provide improved handling and responsiveness.
Conclusion
Installing Powerflex Polyurethane Bushings can significantly enhance the performance of your Subaru WRX. By following this step-by-step guide, you can ensure a successful installation that will improve handling and durability.
Always remember to consult your vehicle’s manual for specific torque specifications and safety information. Happy driving!