Installing the 13b-rew Turbo Kit: Cost Breakdown and Step-by-step Process

by

The 13B-REW turbo kit is a popular upgrade for Mazda RX-7 enthusiasts looking to enhance their vehicle’s performance. This article provides a detailed cost breakdown and a step-by-step process for installing the 13B-REW turbo kit.

Cost Breakdown

Before diving into the installation process, it’s crucial to understand the costs associated with the 13B-REW turbo kit. Below is a breakdown of the estimated expenses.

  • Turbo Kit Cost: $1,500 – $3,000 depending on the brand and components included.
  • Additional Parts: $200 – $500 for hoses, clamps, and gaskets.
  • Labor Costs: $500 – $1,000 if hiring a professional mechanic.
  • Tools: $100 – $300 for any specialized tools required.
  • Miscellaneous: $100 for fluids and other small items.

Overall, the total cost for installing the 13B-REW turbo kit can range from $2,500 to $5,200, depending on whether you choose to do it yourself or hire a professional.

Step-by-Step Installation Process

Installing the 13B-REW turbo kit requires careful attention to detail. Follow these steps to ensure a successful installation.

Step 1: Gather Required Tools and Parts

Before starting the installation, gather all necessary tools and parts. This includes:

  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Jack and jack stands
  • Coolant and oil
  • 13B-REW turbo kit

Step 2: Prepare the Vehicle

Ensure the vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation.

Step 3: Remove the Existing Components

Begin by removing the existing intake and exhaust components. This includes:

  • Intake manifold
  • Exhaust manifold
  • Turbocharger (if applicable)
  • Cooling system components

Take care to label any hoses or cables for easier reinstallation.

Step 4: Install the Turbo Kit

With the old components removed, it’s time to install the new turbo kit. Follow these sub-steps:

  • Attach the new exhaust manifold to the engine block.
  • Install the turbocharger onto the exhaust manifold.
  • Connect the new intake manifold to the turbocharger.
  • Install all hoses, clamps, and gaskets according to the manufacturer’s instructions.

Step 5: Reconnect the Cooling System

Reinstall any cooling system components that were removed. Ensure all connections are secure to prevent leaks.

Step 6: Fill Fluids

Fill the engine with fresh oil and coolant. Check the manufacturer’s specifications for the correct types and quantities.

Step 7: Reconnect the Battery and Start the Engine

Reconnect the battery and start the engine. Allow it to idle for a few minutes while checking for any leaks or unusual noises.

Step 8: Test Drive

Once you are satisfied that everything is functioning properly, take the vehicle for a test drive. Monitor the performance and listen for any issues.

Conclusion

Installing the 13B-REW turbo kit can significantly enhance your Mazda RX-7’s performance. By following this cost breakdown and step-by-step installation guide, you can ensure a successful upgrade. Always remember to consult the manufacturer’s instructions and consider professional assistance if needed.