Installing the Afe Stage 2 Supercharger on Your Grand Cherokee Srt: Costs and Step-by-step Process

by

The AFE Stage 2 Supercharger is a popular upgrade for the Grand Cherokee SRT, offering significant performance enhancements. In this article, we will cover the costs associated with the installation and provide a detailed step-by-step process to guide you through the installation.

Understanding the AFE Stage 2 Supercharger

The AFE Stage 2 Supercharger is designed to increase horsepower and torque, providing a more exhilarating driving experience. It features a high-efficiency design that maximizes airflow and performance.

  • Increased horsepower: Up to 200+ HP
  • Improved torque: Enhanced low-end response
  • Better throttle response: More immediate power delivery

Cost Breakdown

Before diving into the installation process, it’s essential to understand the costs involved. Here’s a breakdown of the expected expenses:

  • AFE Stage 2 Supercharger Kit: $6,000 – $8,000
  • Labor Costs: $1,000 – $2,000
  • Additional Parts and Fluids: $200 – $500
  • Total Estimated Cost: $7,200 – $10,500

Tools and Materials Needed

Gathering the right tools and materials is crucial for a successful installation. Here’s a list of what you will need:

  • Socket set
  • Wrench set
  • Screwdrivers (flathead and Phillips)
  • Torque wrench
  • Gasket maker
  • Coolant
  • Oil
  • Shop towels

Step-by-Step Installation Process

Step 1: Prepare the Vehicle

Before starting, ensure the vehicle is parked on a flat surface, and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation.

Step 2: Remove the Stock Components

Begin by removing the factory air intake system and the throttle body. Carefully detach any sensors and hoses connected to these components.

Step 3: Install the Supercharger

Once the stock components are removed, position the AFE Stage 2 Supercharger in place. Ensure it aligns correctly with the engine and secure it using the provided bolts.

Step 4: Reconnect the Throttle Body and Air Intake

Reattach the throttle body and the new air intake system. Make sure all connections are tight and secure to prevent any air leaks.

Step 5: Install Additional Components

Install any additional components that come with the supercharger kit, such as intercoolers or new hoses. Follow the manufacturer’s instructions for specific details on these parts.

Step 6: Check Fluid Levels

Before starting the engine, check all fluid levels, including coolant and oil. Top off any fluids as necessary to ensure proper operation.

Step 7: Reconnect the Battery and Start the Engine

Reconnect the battery, and start the engine. Allow it to idle for a few minutes and check for any leaks or unusual noises.

Step 8: Test Drive

Finally, take the vehicle for a test drive to ensure everything is functioning correctly. Pay attention to the throttle response and overall performance.

Conclusion

Installing the AFE Stage 2 Supercharger on your Grand Cherokee SRT can significantly enhance your vehicle’s performance. With the right tools, materials, and following this step-by-step guide, you can achieve impressive results. Always consult with a professional if you are unsure about any part of the installation process.