Table of Contents
The G87 M2 has gained a reputation for its impressive performance and sleek design. One of the most popular upgrades among enthusiasts is the installation of the Akrapovic exhaust system. This modification not only enhances the sound of the vehicle but also increases horsepower by up to 15 HP. In this article, we will explore the benefits of installing the Akrapovic exhaust and provide a step-by-step guide on how to do it.
Benefits of the Akrapovic Exhaust System
Upgrading to an Akrapovic exhaust system offers several advantages for G87 M2 owners. Below are some of the key benefits:
- Enhanced Sound: The Akrapovic exhaust produces a deeper and more aggressive sound, giving the M2 a sportier character.
- Increased Performance: With an increase of up to 15 HP, the exhaust system improves throttle response and overall performance.
- Weight Reduction: The lightweight materials used in the Akrapovic exhaust help reduce the overall weight of the vehicle.
- Aesthetics: The sleek design of the exhaust tips adds a visually appealing touch to the rear of the M2.
Tools and Materials Needed
Before starting the installation process, make sure you have the following tools and materials on hand:
- Socket wrench set
- Torque wrench
- Cutting tool (if necessary)
- Jack and jack stands
- Safety glasses and gloves
- Akrapovic exhaust system
- Installation manual
Step-by-Step Installation Guide
Step 1: Prepare the Vehicle
Begin by parking the G87 M2 on a flat surface and engaging the parking brake. Use a jack to lift the rear of the vehicle and secure it with jack stands. This will provide you with ample space to work underneath the car.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system and use the socket wrench to remove the bolts securing it to the exhaust manifold and the hangers. If necessary, use a cutting tool to detach any sections that are particularly difficult to remove. Carefully take out the stock exhaust and set it aside.
Step 3: Install the Akrapovic Exhaust
With the stock exhaust removed, it’s time to install the Akrapovic exhaust system. Begin by positioning the new exhaust in place, ensuring that it aligns properly with the exhaust manifold and hangers. Use the provided bolts to secure the exhaust system, tightening them to the manufacturer’s specifications using a torque wrench.
Step 4: Check for Leaks
After the installation is complete, start the engine and let it idle for a few minutes. Listen carefully for any unusual sounds that might indicate a leak. If everything sounds good, proceed to check visually for any exhaust fumes escaping from the connections.
Step 5: Lower the Vehicle
Once you are confident that there are no leaks, carefully lower the vehicle back to the ground. Remove the jack stands and ensure the vehicle is stable before taking it for a test drive.
Conclusion
Installing the Akrapovic exhaust on your G87 M2 is a rewarding upgrade that enhances both the sound and performance of the vehicle. With the right tools and a bit of patience, you can complete the installation process yourself and enjoy the benefits of increased horsepower and a more aggressive exhaust note. Happy driving!