Table of Contents
The AMS Alpha 9 GT-R Turbo Kit is a popular upgrade for Nissan GT-R enthusiasts looking to boost their vehicle’s performance. This guide will take you through the complete installation process step-by-step, ensuring you have all the necessary information to successfully install the kit.
What You Will Need
- AMS Alpha 9 GT-R Turbo Kit
- Basic hand tools (sockets, wrenches, screwdrivers)
- Torque wrench
- Jack and jack stands
- Coolant
- Oil
- Safety glasses and gloves
Preparation
Before starting the installation, ensure you have a clean workspace and all tools organized. It’s also important to read through the AMS Alpha 9 installation manual thoroughly.
Safety First
Always wear safety glasses and gloves when working on your vehicle. Make sure the car is on a flat surface and secure before starting the installation.
Step-by-Step Installation
Step 1: Remove the Stock Turbochargers
Begin by removing the engine cover and any components obstructing access to the turbochargers. Disconnect the battery and drain the coolant to prevent any spills.
Next, remove the intake pipes and exhaust manifolds connected to the stock turbochargers. Carefully detach the oil and coolant lines leading to the turbos. Once everything is disconnected, unbolt the stock turbochargers from the engine and remove them from the vehicle.
Step 2: Install the New Turbochargers
With the stock turbos removed, it’s time to install the AMS Alpha 9 turbochargers. Begin by placing the new turbos in position and securing them with the provided bolts. Ensure all gaskets are in place to prevent leaks.
Reconnect the oil and coolant lines, tightening them securely. Follow this by reattaching the exhaust manifolds and intake pipes to the new turbochargers.
Step 3: Upgrade the Fuel System
The Alpha 9 kit requires an upgraded fuel system to support the increased power. Start by replacing the stock fuel injectors with the high-flow injectors included in the kit.
Remove the fuel rail and swap out the injectors, ensuring they are seated properly. Reinstall the fuel rail and reconnect all fuel lines. Check for any leaks before proceeding.
Step 4: Install the Intercooler and Piping
The next step is to install the upgraded intercooler and associated piping. Begin by mounting the intercooler in the designated location, ensuring it is secure.
Connect the piping from the turbochargers to the intercooler and from the intercooler to the intake manifold. Make sure all couplings and clamps are tight to prevent any boost leaks.
Step 5: Reconnect Electrical Components
Reconnect any electrical components that were unplugged during the installation process. This includes the mass airflow sensor and any other sensors affected by the turbo installation.
Step 6: Final Checks
Before starting the engine, double-check all connections, bolts, and fittings. Ensure that there are no leaks in the fuel or coolant systems.
Post-Installation
Once the installation is complete, reconnect the battery and fill the cooling system with fresh coolant. Start the engine and allow it to idle while checking for any leaks or unusual noises.
Tuning Your GT-R
After installation, it is crucial to tune your GT-R to ensure optimal performance. Consult with a professional tuner who is experienced with the AMS Alpha 9 kit to achieve the best results.
Conclusion
Installing the AMS Alpha 9 GT-R Turbo Kit can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.