Installing the Ams Alpha 9 Turbo Kit on Your A90 Supra: Step-by-step Breakdown

by

Installing the AMS Alpha 9 Turbo Kit on your A90 Supra can significantly enhance performance and driving experience. This guide will walk you through the installation process step-by-step, ensuring you have all the necessary information to complete the task efficiently.

Tools and Materials Needed

Before you begin the installation, gather the following tools and materials:

  • AMS Alpha 9 Turbo Kit
  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Wrenches
  • Jack and jack stands
  • Coolant
  • Oil
  • Shop towels
  • Safety glasses
  • Gloves

Preparation Steps

Preparation is key to a successful installation. Follow these steps to prepare your A90 Supra:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues.
  • Raise the front of the car using a jack and secure it with jack stands.
  • Drain the coolant and oil to avoid spills during installation.

Removing the Stock Turbo

Once you have prepared your vehicle, you can begin removing the stock turbo. Follow these steps:

  • Remove the intake manifold by unscrewing the bolts and disconnecting any sensors.
  • Disconnect the turbocharger’s oil and coolant lines.
  • Unbolt the stock turbo from the exhaust manifold.
  • Carefully remove the stock turbo from the engine bay.

Installing the AMS Alpha 9 Turbo Kit

With the stock turbo removed, you can now install the AMS Alpha 9 Turbo Kit. Follow these steps:

  • Position the new turbo into place on the exhaust manifold.
  • Secure the turbo with the provided bolts, ensuring they are torqued to specifications.
  • Reconnect the oil and coolant lines to the new turbo.
  • Install the new intake manifold, ensuring all sensors are connected properly.

Connecting the Exhaust and Intake Systems

After installing the turbo, you need to connect the exhaust and intake systems:

  • Attach the exhaust downpipe to the new turbo, securing it with clamps.
  • Connect the intake piping as per the AMS instructions.
  • Ensure all clamps and connections are tight to prevent leaks.

Final Steps and Testing

Once everything is installed, follow these final steps to complete the process:

  • Reinstall any components that were removed during the process.
  • Refill the engine with oil and coolant.
  • Reconnect the battery.
  • Start the engine and check for any leaks or issues.
  • Allow the engine to warm up and monitor performance.

Conclusion

Installing the AMS Alpha 9 Turbo Kit on your A90 Supra is an exciting project that can greatly improve your vehicle’s performance. By following this step-by-step breakdown, you can ensure a successful installation. Always remember to work safely and consult the AMS manual for specific instructions related to your kit.